We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue braided cable with four straight SATA connectors at each end, 2.3 ft long

YEPLOOK

YEPLOOK 4 SATA to 4 SATA 6Gbps SAS cable 2.3 ft

SKU CH-FZ45-177GW

Connects four SATA drives at 6 Gbps with a 2.3 ft blue braided cable supporting hot swap

  • ColorBlue

Cable Length 2.3 ft.

  • 6 Gbps transfer speed supports fast drive arrays
  • 3 ft length fits typical server chassis
  • Four SATA connectors link multiple drives at once
  • Braided nylon mesh keeps cables tidy and ventilated
  • Hot-swap support allows drive changes without power-down

Cable purpose and audience

This cable connects four SATA drives to a single SAS or SATA controller using a 4 SATA to 4 SATA layout. It suits server builders and storage enthusiasts adding multiple hard drives or SSDs to a backplane or RAID card.

Capacity and headroom

Each lane carries data at up to 6Gbps under the SATA 3.0 specification. The 2.3 ft length fits typical server chassis routing while supporting hot-swap drive trays. Bandwidth per drive remains at the SATA 6Gbps ceiling, so four saturated drives can saturate the upstream link.

Thermals noise and power

The cable draws no external power and adds no active cooling requirement. Its nylon braided mesh sleeve promotes airflow around the wire bundle inside the chassis. Passive operation means zero acoustic contribution and no thermal load on the system.

Highlights

  • 6 Gbps transfer speed supports fast drive arrays
  • 3 ft length fits typical server chassis
  • Four SATA connectors link multiple drives at once
  • Braided nylon mesh keeps cables tidy and ventilated
  • Hot-swap support allows drive changes without power-down

Specifications

Model4 SATA TO 4 SATA
ColorBlue

Other versions of this model

2 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will this 4 SATA to 4 SATA cable work with the older SATA 3 Gbps hard drives I already have installed?

Yes. The cable supports SATA 3.0 at 6 Gbps and is backward compatible with earlier SATA revisions, so existing 3 Gbps drives will function at their native speed.

How can I verify the 6 Gbps link is active after connecting the cable to my server backplane?

Check the negotiated link speed in your RAID controller BIOS, HBA utility, or operating-system disk tool; it should report 6 Gbps for each connected drive when the cable is seated correctly.

Does the 2.3 ft blue braided cable include mounting brackets or only the 7-pin connectors?

Only the symmetrical double straight 7-pin SATA connectors on a nylon braided mesh cable are included; brackets, screws or additional adapters must be sourced separately.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.