We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black plastic push-button switch with blue LED and 1.8 m cable, adhesive-backed round housing

YARCHONN PC Power Button Switch 1.8M Cable

SKU CH-GTAY-14F7B

A 1.8-metre extension cable with an adhesive-backed push button and blue LED adds a convenient desktop power switch for PC builds or repairs

  • TypePush Buttons
  • Switch FunctionON-OFF
  • Voltage5 volts
  • Housing MaterialPVC, Plastic
  • Mounting StyleSurface Mount
  • Size/Dimensions7.48 in x 4.72 in x 0.5 in
  • Place power button anywhere with 1.8 m cable
  • Blue LED shows power status at a glance
  • 3M adhesive keeps switch firmly in place
  • Splitter wires let original and new switch work together
  • Replaces damaged case switch without tools

External PC power button with 1.8 m cable

The YARCHONN push-button switch extends the motherboard power header to a convenient desktop location. A blue LED indicates the on state while the 1.8 metre cable reaches around chassis obstacles. The unit mounts with pre-applied 3M adhesive and connects via standard POWER SW and POWER LED pins. It operates at 5 volts and draws up to 2 amps.

Suited for DIY builders and repair scenarios

Ideal for cases with broken front-panel switches, water-cooled builds with limited panel access, or any setup where the tower sits under a desk. The package includes a 1-to-2 splitter so the original case button remains functional alongside the external unit. Not intended for buyers who need a reset button, a momentary-contact switch, or a latching mechanism with tactile click feedback.

Sustained-operation behaviour

The switch is rated for continuous 24 watt load at 5 volts without thermal throttling. The PVC housing and plastic actuator show no deformation during extended use in typical indoor environments. The adhesive bond remains secure on clean, flat surfaces over long periods. No active cooling or duty-cycle limitation is required for normal PC power-on and power-off cycles.

Highlights

  • Place power button anywhere with 1.8 m cable
  • Blue LED shows power status at a glance
  • 3M adhesive keeps switch firmly in place
  • Splitter wires let original and new switch work together
  • Replaces damaged case switch without tools

Specifications

TypePush Buttons
BrandYARCHONN
Switch FunctionON-OFF
Voltage5 volts
Housing MaterialPVC, Plastic
Mounting StyleSurface Mount
Size/Dimensions7.48 in x 4.72 in x 0.5 in
MaterialPlastic
Horsepower24 watts, 2 amps
Operating Frequencynot_applicable
DutyPC
Compatibility/FitmentPC
Resolution1
Display TypeYR-250040DL1
FeaturesPC
Part NumberYR-250040DL1

Questions about this item

What motherboard headers must be free to connect the POWER LED+, POWER LED- and POWER SW plugs?

You need three adjacent front-panel pins — two for the LED pair and one for the power-switch signal — on a standard ATX header.

Can the original case power button stay connected while this external switch is installed?

Yes, the kit includes two 1-to-2 splitter wires so both the case button and the YR-250040DL1 switch operate the same motherboard pins.

How do I confirm the switch is wired correctly after sticking it to the desk?

Press the round button; the blue LED should light and the PC should power on or off depending on its current state.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.