We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black plastic IR remote with 44 buttons and a compact two-port control box for RGB LED strips

KEHIPI

KEHIPI 44-Key IR Remote Controller 2-Port 12-24V RGB Strip Light Control

SKU CH-EAE0-6CZDQ

Controls two 4-pin RGB LED strips from a single 44-key IR remote with 20 static colours, brightness adjustment and multiple dynamic modes over a 30-foot range

  • MaterialAcrylonitrile Butadiene Styrene
  • 44-key IR remote offers 20 static colours plus brightness and mode control
  • Two 4-pin ports drive two RGB strip reels simultaneously from one controller
  • Works with 12 V to 24 V DC power supplies for flexible installation
  • IR signal reaches about 30 feet when aimed directly at the receiver
  • Compatible with 5050 and 3528 4-pin LED strip lights

44-Key IR Remote for RGB Strips

This controller manages two reels of 4-pin RGB LED tape from a single handset. It accepts a DC supply between 12 V and 24 V and offers 20 static colours plus brightness adjustment, on/off switching and several animated modes such as flash, strobe, fade and smooth colour change. The unit is aimed at hobbyists and installers who want a simple way to drive 3528 or 5050 strips without wiring a second controller.

IR Operation and Installation Notes

The infrared remote works at roughly 30 feet but requires direct line-of-sight to the receiver; obstructions or angled aiming will cause missed commands. Connection is straightforward: plug the DC supply into the barrel jack, attach up to two strip reels to the 4-pin outputs and pair the remote. No software or pairing routine is involved, so the most common issue is simply forgetting to point the remote at the sensor.

Suitable for Basic Dual-Strip Setups

This kit suits anyone adding accent lighting to a vehicle, workshop bench or display case where two strips must mirror each other. It does not support addressable LEDs, Wi-Fi or app control, so builders who need per-LED animation, voice-assistant integration or more than two output channels should look at a different controller type.

Highlights

  • 44-key IR remote offers 20 static colours plus brightness and mode control
  • Two 4-pin ports drive two RGB strip reels simultaneously from one controller
  • Works with 12 V to 24 V DC power supplies for flexible installation
  • IR signal reaches about 30 feet when aimed directly at the receiver
  • Compatible with 5050 and 3528 4-pin LED strip lights

Specifications

BrandSUPERNIGHT
MaterialAcrylonitrile Butadiene Styrene

Questions about this item

How can I verify the controller is working after setup?

Point the 44-key IR remote at the unit within 30 feet and press the on/off button; the connected RGB strips should light immediately and respond to the 20 static colour, brightness, flash, strobe, fade and smooth-change selections.

What comes in the box and what must I buy separately?

The package includes the 2-port controller and 44-key IR remote; a 12-24 V DC power supply and 4-pin 5050 or 3528 RGB LED strip reels are not included and must be purchased separately.

Which version should I choose for my LED strips?

This single model supports both 12 V and 24 V supplies and drives two reels of 4-pin 5050 or 3528 RGB strip simultaneously; select it when you need dual-zone control from one remote.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.