YAMATAKE
YAMATAKE Azbil FRS100C100-2 Combustion Controller Red
Combustion controller for industrial burner management, supplied as a single red unit in a box
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- Precise combustion control for safer industrial processes
- YAMATAKE Azbil engineering ensures reliable performance
- Red finish provides clear visibility in equipment panels
- Supplied as a single unit in protective box
- Three-year parts coverage with one-year labour support
Industrial Combustion Controller
The YAMATAKE Azbil FRS100C100-2 is a combustion controller designed for industrial heating systems. It manages burner sequences and safety monitoring in commercial boilers and process heaters. The unit suits facility engineers and maintenance teams responsible for fuel-fired equipment. Its red housing provides clear visual identification in plant environments.
Panel Integration Requirements
The controller mounts in a standard panel cut-out and connects to flame detectors, fuel valves and limit switches. Wiring terminals accept standard gauge conductors for power and signal circuits. Installation frees up relay logic by consolidating ignition timing, flame proving and lockout functions in one module. No additional programmer is needed for basic commissioning.
Operational Characteristics
Solid-state electronics draw minimal current during normal run cycles. The enclosure dissipates heat passively without forced-air cooling. Audible noise is limited to internal relay clicks during start-up and safety shutdown events. A three-year parts and one-year labor coverage period applies to the unit.
Highlights
- Precise combustion control for safer industrial processes
- YAMATAKE Azbil engineering ensures reliable performance
- Red finish provides clear visibility in equipment panels
- Supplied as a single unit in protective box
- Three-year parts coverage with one-year labour support
Specifications
| Brand | YAMATAKE |
|---|---|
| Model | Azbil FRS100C100-2 |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
What is the maximum continuous operating temperature before the FRS100C100-2 combustion controller triggers a safety shutdown?
The controller monitors flame temperature and will shut down the burner if the measured value exceeds the configured limit, protecting the system from overheating.
How much audible noise does the FRS100C100-2 produce when running continuously in a boiler room?
The unit itself has no moving parts and operates silently; any noise comes from the burner or blower it controls.
Which flame detector and power supply must already be installed for the FRS100C100-2 to function?
A compatible flame rod or UV scanner wired to the controller terminals and a 100 V AC supply are required for operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



