Xnrtop 6 Pcs HSS Drill Tap Set M3-M10 6.35mm Hex Titanium
Six HSS 4341 titanium-coated drill taps cover metric M3–M10 threads with 0.5–1.5 mm pitch and a 6.35 mm hex shank for machine use
- MaterialSteel
- CordlessFalse
- Color/FinishTitanium
- Item Count12 pack
- Color FamilyTitanium
- Chuck TypeHex
- Drill and tap in one pass saves time
- Titanium-coated HSS 4341 steel extends tool life
- 35 mm hex shank fits quick-change chucks
- Metric sizes M3 to M10 cover common threads
- Spiral flutes clear chips for cleaner holes
6-piece M3-M10 HSS drill-tap set
This set combines drilling and tapping in a single pass for metric threads from M3 to M10. Six titanium-coated high-speed steel bits cover pitches of .5, .7, .8, 1.0, 1.25 and 1.5 mm. Each bit is marked for quick size identification. The tools are intended for machine use where repeatable accuracy matters.
¼-inch hex shank for quick-change chucks
The 6.35 mm hex shank fits standard quick-change holders on drill presses, lathes or CNC machines. A tapered lead prevents the bit from walking and reduces the chance of over-drilling. Back taper on each tap clears chips ahead of the cutting edges, protecting newly formed threads. No separate drill bit or tap handle is required.
HSS 4341 substrate with titanium coating
The alloy steel core retains hardness during extended cutting cycles while the titanium surface reduces friction and wear. Spiral flutes evacuate chips continuously, maintaining cutting efficiency in deeper holes. Machine-driven operation eliminates the variation of hand tapping, so thread quality stays consistent across repeated operations.
Highlights
- Drill and tap in one pass saves time
- Titanium-coated HSS 4341 steel extends tool life
- 35 mm hex shank fits quick-change chucks
- Metric sizes M3 to M10 cover common threads
- Spiral flutes clear chips for cleaner holes
Specifications
| Brand | Xnrtop |
|---|---|
| Model | js-drill |
| Material | Steel |
| Cordless | False |
| Color/Finish | Titanium |
| Item Count | 12 pack |
| Color Family | Titanium |
| Chuck Type | Hex |
| Chuck Size | 0.25 inches inches |
| Core Bit Cap Concrete | Alloy Steel, High Speed Steel (HSS) |
| Fastener Range | M3 to M10 |
| Head Style | Hex |
| Nail Diameter | M3 to M10 |
| Features | Alloy Steel |
| Part Number | nr-js6 |
Questions about this item
What is the largest thread size the M10 tap can cut before the bit wears out?
The set cuts metric threads from M3 to M10 with pitches of .5, .7, .8, 1.0, 1.25 and 1.5 mm using HSS 4341 steel with a titanium coating for extended life.
How hot do the bits get when tapping steel all day on a machine?
The titanium-coated HSS 4341 bits are designed for machine use where spiral flutes improve chip clearing, reducing heat build-up during continuous operation.
What drive tool is needed for the 6.35 mm hex shank?
A 1/4-inch (6.35 mm) quick-change hex chuck or impact driver accepts the tapered shank directly for machine tapping.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SIEMENS
SIEMENS 52PP2D2AB 30 mm Illuminated Push Button Red 24 V LED 1NO/1NC
$179.99
0.00213122BTC
In stock