Wright Group
Wright Group 89-46MM 46 mm Impact Socket
A deep 46 mm metric impact socket with 28.6 mm bolt clearance and ASME B107.110 compliance
- 46 mm deep socket clears long bolts
- 6 mm bolt clearance for deep reach
- Alloy steel construction handles high impact torque
- Black oxide finish resists corrosion and wear
- Meets ASME B107.110 for professional use
Wright Group 89-46MM Impact Socket
The Wright Group 89-46MM is a metric impact socket built for 1-inch drive impact wrenches. It targets professional mechanics and heavy-equipment technicians who need a 46 mm deep socket for large fastener work. The alloy-steel construction and black oxide finish suit daily shop use.
46 mm Deep Socket with 28.6 mm Bolt Clearance
The single specification that decides fit is the 46 mm opening paired with a 28.6 mm deep-well depth. This clearance lets the socket fully engage long-thread bolts without bottoming out. The 6-point profile matches metric fasteners and the ASME B107.110 standard confirms dimensional accuracy.
Sustained Impact Load Performance
Under repeated high-torque cycles the alloy steel body resists cracking and deformation better than standard chrome sockets. The black oxide coating maintains surface integrity through heat and abrasion. Deep geometry distributes stress along the full 4 1/8-inch length during extended fastening runs.
Highlights
- 46 mm deep socket clears long bolts
- 6 mm bolt clearance for deep reach
- Alloy steel construction handles high impact torque
- Black oxide finish resists corrosion and wear
- Meets ASME B107.110 for professional use
Specifications
| Brand | WRIGHT TOOL |
|---|
Questions about this item
What does the 46 mm size mean when I fit this socket onto a fastener?
The 46 mm opening matches a 46 mm metric bolt or nut, giving a precise six-point grip that distributes torque evenly across the flats.
How does the 1" drive and ASME B107.110 rating limit what I can use this socket with?
The 1" square drive only fits impact wrenches or adaptors with a matching 1" anvil, and the ASME B107.110 standard defines the dimensional and hardness requirements for that drive size.
Will the 4 1/8 inch overall length and 28.6 mm bolt clearance let me reach recessed fasteners on my equipment?
Yes, the deep-profile design provides 28.6 mm of bolt clearance inside a 4 1/8 inch long body, allowing access to fasteners set deeper into assemblies.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SIEMENS
SIEMENS 52PP2D2AB 30 mm Illuminated Push Button Red 24 V LED 1NO/1NC
$179.99
0.0020933BTC
In stock