WIHA
WIHA 32933 6.3" Insulated Diagonal Cutting Plier
Insulated diagonal cutting pliers rated for 1,000 V with a 6.3 in overall length and flush cut profile
- TypePliers
- Insulated to 1,000 V for live-wire safety
- Dynamic joint reduces cutting effort by design
- Flush cut profile leaves clean wire ends
- 3 in overall length fits tight spaces
- Cuts up to 6 AWG wire capacity
6.3" Insulated Diagonal Cutting Plier
The Wiha 32933 is a 6.3 inch insulated diagonal cutting plier built for electrical work up to 1,000 volts. It suits electricians and technicians who need flush cuts on wire while maintaining protection against live circuits. The Dynamic Joint design reduces the hand force required for each cut. This tool is not for users who require ESD-safe handles or non-sparking materials for hazardous environments.
Capacity and headroom
The plier cuts wire up to 6 AWG with a maximum jaw opening of 5/8 inch and a cutter length of 3/4 inch. The flush cut profile leaves a clean finish on copper and aluminium conductors. The brushed finish resists corrosion during daily use. The tool reaches its limit on thicker cables or hardened wire beyond the stated gauge, requiring a larger cutter for those tasks.
1,000 V insulation rating
The insulation is tested to 1,000 volts, providing a safety barrier for work on live low-voltage systems. The head offset angle is 0 degrees, keeping the cutting edges in line with the handles for straight access. The manual jaw opening gives direct control over each cut. The plier lacks a tether point, so it cannot be secured to a lanyard for work at height.
Highlights
- Insulated to 1,000 V for live-wire safety
- Dynamic joint reduces cutting effort by design
- Flush cut profile leaves clean wire ends
- 3 in overall length fits tight spaces
- Cuts up to 6 AWG wire capacity
Specifications
| Brand | Wiha |
|---|---|
| Model | 32933 |
| Type | Pliers |
Questions about this item
Will the 6.3-inch length and 1000 V insulation of the Wiha 32933 match my existing insulated tool kit?
The Wiha 32933 is a 6.3-inch insulated diagonal cutter rated for 1000 V, so it aligns with other 1000 V insulated tools you may already own.
How can I confirm the Dynamic Joint is operating smoothly after I start using the plier?
Open and close the handles; the Dynamic Joint should move freely without binding, and the flush-cut jaws should meet evenly along the full 3/4-inch length.
Does the Wiha 32933 come with a tether point or lanyard, or must I buy one separately?
The plier is not tether ready and no lanyard is included, so a tether accessory would need to be sourced separately if required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SIEMENS
SIEMENS 52PP2D2AB 30 mm Illuminated Push Button Red 24 V LED 1NO/1NC
$179.99
0.00209598BTC
In stock