We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray painted carbon steel enclosure 18 by 18 by 8 inches screw cover 16 gauge

Wiegmann

Wiegmann SC181808 line protection 18 in 8 in D 16 ga

SKU CH-GGXD-9MVCN

Carbon-steel wall-mount enclosure measuring 18 by 18 by 8 inches with 16-gauge construction, captive screws and UL/CSA listings

  • 16-gauge carbon steel construction provides robust protection for electrical components
  • NEMA 1 rating with cULus and CSA certifications confirms compliance with safety standards
  • 18-inch square footprint and 8-inch depth offer ample internal space for wiring
  • Captive plated-steel screws secure the solid cover while preventing lost hardware
  • Embossed mounting holes and included self-tapping screws simplify wall installation

Electrical enclosure for wall-mount protection

The Wiegmann SC181808 is a NEMA 1 rated carbon-steel enclosure finished in gray paint. It measures 18 inches high, 18 inches wide and 8 inches deep with a usable opening depth of 7.88 inches. The solid cover secures with plated-steel captive screws and the box includes self-tapping screws for installation. The 16-gauge construction suits indoor line-protection applications.

Verify mounting space and cover clearance

Confirm the wall area can accommodate the 18 by 18 inch footprint and allow the screw-on cover to be removed fully. Ensure the 8 inch depth fits behind any planned panel or conduit runs. The embossed mounting holes accept standard hardware; check that the supplied self-tapping screws match your wall material before starting.

Steel body dissipates heat without active cooling

The painted carbon-steel shell acts as a passive heat sink for breakers or terminal blocks mounted inside. Under continuous load the enclosure surface warms evenly and radiates heat into the surrounding air. No fans or vents are present, so sustained internal temperature depends on ambient conditions and the heat output of the installed devices.

Highlights

  • 16-gauge carbon steel construction provides robust protection for electrical components
  • NEMA 1 rating with cULus and CSA certifications confirms compliance with safety standards
  • 18-inch square footprint and 8-inch depth offer ample internal space for wiring
  • Captive plated-steel screws secure the solid cover while preventing lost hardware
  • Embossed mounting holes and included self-tapping screws simplify wall installation

Specifications

BrandWIEGMANN

Questions about this item

Does the SC181808 enclosure come with mounting hardware or must I buy screws separately?

The enclosure includes self-tapping screws for mounting the cover. Embossed mounting holes are provided for wall installation; separate lag bolts or anchors are required to secure the box to the wall.

Should I choose the 18 in height model or a different size for a standard 16 ga carbon steel cabinet?

This SC series unit is 18 in high, 18 in wide and 8 in deep with a 16 ga carbon steel body. Select it when those exact outside dimensions and gauge match your panel layout; other sizes are separate part numbers.

What does the 7.88 in usable opening depth mean for fitting components inside the enclosure?

It is the clear internal depth available after the cover is fastened. Any DIN rail, terminal block or relay must not exceed 7.88 in front-to-back including wiring bend radius.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.