Wiegmann
Wiegmann SC-G Galvanized Steel Enclosure 8x8x6 SC080806G
Galvanised steel wall-mount enclosure rated NEMA 1, 16 ga with self-tapping screws and CSA/cULus/UL listing
- TypeBus Plugs
- MaterialHAWA
- Galvanized steel resists corrosion for long outdoor life
- NEMA 1 rating protects indoor circuits from dust and contact
- Embossed mounting holes speed up wall installation
- Self-tapping screws included so no extra hardware is needed
- 16-gauge thickness adds rigidity without excess weight
Galvanized Steel Enclosure 8x8x6
The Wiegmann SC-G series enclosure provides a NEMA 1 rated housing for indoor electrical components. Constructed from 16 gauge galvanized steel with a silver finish, it measures 8 inches high, 8 inches wide and 6 inches deep. The solid cover secures with plated steel screws and self-tapping screws are included for installation.
Indoor electrical installations only
This enclosure suits electricians and panel builders mounting circuit breakers or bus plugs in dry, non-corrosive environments. The embossed mounting holes simplify wall mounting. Installers needing protection against water, dust or outdoor exposure should choose a higher NEMA rated enclosure. Buyers requiring a transparent cover or hinge mechanism must select a different model.
5.88 inch usable opening depth
The internal usable depth of 5.88 inches determines which devices fit inside the box. Verify that your bus plugs, terminal blocks or other components do not exceed this dimension. The enclosure carries CSA, cULus and UL listings for code compliance.
Highlights
- Galvanized steel resists corrosion for long outdoor life
- NEMA 1 rating protects indoor circuits from dust and contact
- Embossed mounting holes speed up wall installation
- Self-tapping screws included so no extra hardware is needed
- 16-gauge thickness adds rigidity without excess weight
Specifications
| Brand | WIEGMANN |
|---|---|
| Type | Bus Plugs |
| Material | HAWA |
Questions about this item
What mounting hardware must the installer already have to secure this SC-G enclosure to the wall?
The enclosure includes self-tapping screws for the cover, but wall-mounting fasteners are not supplied.
Will the 16 ga galvanized steel body and screw-on cover fit alongside legacy bus-plug panels in an existing row?
Yes, the 8 in by 8 in footprint and embossed mounting holes match standard spacing for side-by-side installation.
How can I verify the enclosure meets the required NEMA 1 rating after installation?
Confirm the solid cover is fully seated with all plated screws tightened and the gasket surface makes continuous contact.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



