Wiegmann
Wiegmann SC-G Enclosure 10x8x6 Galvanized Steel line protection
Galvanised steel enclosure with screw-on solid cover, 10 in height, 8 in width, 6 in depth, includes self-tapping screws, CSA and cULus certified
- TypeBus Plugs
- MaterialHAWA
- NEMA 1 rated for indoor line protection
- Galvanized steel construction resists corrosion
- 10 in height by 8 in width fits standard panels
- Includes self-tapping screws for faster mounting
- CSA certified and cULus listed for code compliance
NEMA 1 Galvanised Steel Enclosure
The Wiegmann SC-G enclosure is a wall-mountable steel cabinet rated NEMA 1 for indoor line protection. It suits installers and maintenance teams who need a certified, screw-cover housing for bus plugs or similar electrical components. The 16 ga galvanised construction meets CSA, cULus and UL listed standards for safety compliance.
Thermal and Power Characteristics
The solid steel cover and galvanised finish provide passive heat dissipation for the installed devices without active cooling. No fans or ventilation openings are present, so operation is completely silent and adds no electrical load. The enclosure itself draws no power and imposes no thermal constraint beyond the ambient environment.
Mounting and Connector Implications
Embossed mounting holes allow direct wall attachment using the included self-tapping screws. A plated-steel screw-on cover secures the solid door and maintains the NEMA 1 seal during routine access. The usable opening depth of 5.88 in determines the maximum component profile that can be accommodated inside the 10 in by 8 in by 6 in cabinet.
Highlights
- NEMA 1 rated for indoor line protection
- Galvanized steel construction resists corrosion
- 10 in height by 8 in width fits standard panels
- Includes self-tapping screws for faster mounting
- CSA certified and cULus listed for code compliance
Specifications
| Brand | WIEGMANN |
|---|---|
| Type | Bus Plugs |
| Material | HAWA |
Questions about this item
How do I mount the SC-G enclosure and what step is often missed?
Use the embossed mounting holes to secure the enclosure to the wall, then fasten the included self-tapping screws into the cover; the step often missed is using the self-tapping screws for the cover rather than standard bolts.
What part of the SC-G enclosure will need replacement over time?
The plated steel cover screws may corrode or strip after repeated removal and should be replaced with equivalent plated self-tapping screws to maintain the NEMA 1 seal.
What is the first limitation of the SC-G enclosure during continuous indoor use?
The usable opening depth of 5.88 inches limits the size of internal components that can be installed, which is the first constraint encountered when populating the enclosure.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



