We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray carbon steel pushbutton enclosure, single 30 mm hole, extra deep, captive cover screws

Wiegmann

Wiegmann PBXD1 Pushbutton Enclosure 30mm 1 Hole Steel hardware

SKU CH-VZVK-FQS39

A 30 mm single-hole carbon-steel pushbutton enclosure rated NEMA 12 and 13 with a closed-cell oil-resistant gasket and captive cover screws

  • TypeIndustrial Electrical Controls & Automation
  • NEMA 12/13 rating protects controls from dust and oil
  • Single 30 mm cutout fits one standard pushbutton
  • Extra-deep 4.81 in body allows room for wiring
  • Carbon-steel construction with captive cover screws resists impact
  • cULus listed for compliance with North-American safety standards

30 mm Single-Hole Pushbutton Enclosure

This Wiegmann carbon-steel enclosure accepts one 30 mm pushbutton or pilot device. It measures 4.00 in high by 4.00 in wide by 4.81 in deep and carries NEMA 12 and 13 ratings for indoor protection against dust, dirt and non-corrosive liquids. A closed-cell oil-resistant gasket and captive cover screws complete the seal. External mounting plates allow straightforward surface installation.

Industrial control panels needing one operator

The extra-deep body suits applications where rear clearance is limited or wiring space is valued. Panels requiring multiple devices, conduit entries or a different hole pattern will need another enclosure style. Environments that demand NEMA 4X corrosion resistance or operator interfaces larger than 30 mm are not served by this model.

30 mm cut-out with NEMA 12/13 rating

The 30 mm hole size and the NEMA 12 and 13 ratings together determine whether your pushbutton or pilot light fits and whether the enclosure meets the ingress-protection level your specification requires.

Highlights

  • NEMA 12/13 rating protects controls from dust and oil
  • Single 30 mm cutout fits one standard pushbutton
  • Extra-deep 4.81 in body allows room for wiring
  • Carbon-steel construction with captive cover screws resists impact
  • cULus listed for compliance with North-American safety standards

Specifications

BrandWiegmann
TypeIndustrial Electrical Controls & Automation

Questions about this item

How is the enclosure mounted, and what step is often missed?

Mount it using the external mounting plates with four bolts or lag screws, then torque the captive cover screws to seal the closed-cell oil-resistant gasket — skipping the gasket compression check is the common oversight.

What maintenance will the gasket and screws need later?

Inspect the closed-cell oil-resistant gasket annually for cracks or compression set and replace it if it no longer springs back; verify captive cover screws remain tight and free of corrosion.

What is the first limit reached under sustained use in oily environments?

The NEMA 12/13 rating protects against oil and coolant ingress, so the gasket typically degrades before the carbon-steel body, requiring gasket replacement to maintain the seal.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.