Wiegmann
Wiegmann BN4141206CH Enclosure Gray ANSI 61 Polyester Powder Line Protection
A carbon-steel enclosure with ANSI 61 powder coat, NEMA 12, 13 and 4 ratings, hinged solid cover, clamps and IP66 protection
- TypeBus Plugs
- NEMA 12, 13, 4 rated enclosure protects against dust and water ingress
- ANSI 61 gray polyester powder finish resists corrosion in harsh environments
- Hinged screwdown clamps with neoprene gasket ensure a secure IP66 seal
- Carbon steel 14/16 gauge construction with external mounting plates simplifies wall installation
- CSA, cULus, IEC and UL listed certifications confirm compliance with safety standards
Industrial Wall-Mount Enclosure
The Wiegmann BN4141206CH is a carbon steel enclosure finished in gray ANSI 61 polyester powder. It measures 14 in high, 12 in wide and 6 in deep with a usable opening depth of 5.88 in. The unit carries NEMA 12, 13 and 4 ratings plus IP66 protection and holds CSA, cULus, IEC and UL listings.
Suited for Indoor Hazardous Areas
This enclosure fits installations that need wall mounting with external plates and a hinged, screw-down clamp cover sealed by a neoprene gasket. The 14/16 ga steel and solid cover serve environments requiring the listed NEMA and IP ratings. Buyers who need a different NEMA rating, a larger usable depth or a non-metallic body should look at other enclosures.
NEMA 12, 13, 4 and IP66 Rating
The combined NEMA 12, 13, 4 and IP66 rating is the single specification that decides suitability. It confirms protection against dust, dripping water, oil and hose-directed water for indoor industrial use. Verify that your application requires exactly this rating set before purchasing.
Highlights
- NEMA 12, 13, 4 rated enclosure protects against dust and water ingress
- ANSI 61 gray polyester powder finish resists corrosion in harsh environments
- Hinged screwdown clamps with neoprene gasket ensure a secure IP66 seal
- Carbon steel 14/16 gauge construction with external mounting plates simplifies wall installation
- CSA, cULus, IEC and UL listed certifications confirm compliance with safety standards
Specifications
| Brand | WIEGMANN |
|---|---|
| Type | Bus Plugs |
Questions about this item
What mounting hardware must I already have to install the BN4-CH enclosure?
The enclosure includes external mounting plates, so you only need suitable wall anchors and fasteners for your mounting surface.
Will the 14 in height and 12 in width fit alongside my existing 14/16 ga carbon steel enclosures?
Yes, the BN4-CH shares the same 14 in height, 12 in width and 14/16 ga steel construction, so it aligns with those enclosures.
How can I confirm the IP66 seal is intact after I close the hinged cover?
Engage all screw-down clamps until the neoprene gasket compresses evenly around the perimeter; the solid cover should then sit flush with no visible gaps.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



