Wiegmann
Wiegmann 8.0" x 8.0" x 8.0" Metallic Enclosure Gray Screws Closure
An 8.0-inch carbon-steel enclosure with screw-on cover, ANSI 61 polyester powder finish and embossed mounting holes for wall installation
- TypeBus Plugs
- NEMA 1 rated enclosure protects indoor circuits
- 16-gauge carbon steel body resists impact and corrosion
- ANSI 61 polyester powder finish in gray withstands harsh environments
- Embossed mounting holes simplify wall installation
- Plated steel screws and self-tapping hardware ensure secure closure
8-Inch Carbon-Steel Enclosure
The Wiegmann SC-series enclosure is a NEMA 1-rated box built from 16-gauge carbon steel with an ANSI 61 grey polyester-powder finish. It measures 8.0 inches high, wide and deep and provides a usable opening depth of 7.88 inches for housing circuit-breaker or bus-plug components in indoor commercial or light-industrial settings.
Screw-Cover Mounting with Pre-Embossed Holes
The solid cover fastens with plated steel screws that thread into self-tapping hardware included in the package. Embossed mounting holes on the back simplify wall attachment, while factory knockouts allow conduit entry without additional drilling. Misaligned screw starts or over-torquing the self-tapping screws can strip the thin-gauge threads, so hand-tightening is advised.
Indoor-Rated Protection Under Continuous Operation
The NEMA 1 rating guards against falling dirt and incidental contact but offers no defence against water, oil or corrosive atmospheres. The powder-coat finish resists humidity and minor abrasion during long-term service, yet the enclosure is not suited for outdoor, wash-down or hazardous-location duty where a higher NEMA rating would be required.
Highlights
- NEMA 1 rated enclosure protects indoor circuits
- 16-gauge carbon steel body resists impact and corrosion
- ANSI 61 polyester powder finish in gray withstands harsh environments
- Embossed mounting holes simplify wall installation
- Plated steel screws and self-tapping hardware ensure secure closure
Specifications
| Brand | WIEGMANN |
|---|---|
| Type | Bus Plugs |
Questions about this item
How can I confirm the enclosure is properly sealed after mounting?
Verify the plated steel screws are fully tightened and the ANSI 61 polyester powder finish shows no gaps around the 8.0 inch depth perimeter.
Which mounting hardware is included and what must I supply?
Self-tapping screws for the cover are included; you must provide wall-mount fasteners suitable for the embossed mounting holes on the 16 gauge carbon steel body.
Which NEMA rating and usable depth suit indoor wiring junctions?
The NEMA 1 rating and 7.88 inch usable opening depth are intended for general-purpose indoor electrical enclosures.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



