White Lightning
White Lightning W70100010 Construction Adhesive 9 oz Cartridge Applicator
A 9 oz cartridge of white acrylic construction adhesive that remains flexible, resists shrinking, and can be painted after a 10-minute working time
- 10-minute working time for precise placement
- Flexible, shrink-proof bond handles joint movement
- Waterproof acrylic base resists moisture damage
- Paintable finish blends with interior surfaces
- GreenGuard Gold certified for low VOC emissions
White Lightning W70100010 Construction Adhesive
White Lightning W70100010 Construction Adhesive is a 9 oz cartridge designed for interior bonding tasks. Its acrylic base provides a flexible, shrink-proof bond that remains waterproof after curing. The product carries GreenGuard Gold Certification and features low odour for indoor use.
Suited for interior trim and panel work.
This adhesive suits installers fixing trim, panels or mouldings inside buildings where a paintable, white finish is required. The 10 minute working time allows repositioning during fitting. Buyers needing exterior-grade adhesion or a larger container volume should look at alternative products.
Sustained interior performance with waterproof cure
Under sustained indoor conditions the cured bead stays flexible and resists shrinking, maintaining a waterproof seal. VOC content is 28.6 percent by weight, measured at 2 g/L, meeting GreenGuard Gold limits. California Proposition 65 warnings apply for cancer and reproductive harm.
Highlights
- 10-minute working time for precise placement
- Flexible, shrink-proof bond handles joint movement
- Waterproof acrylic base resists moisture damage
- Paintable finish blends with interior surfaces
- GreenGuard Gold certified for low VOC emissions
Specifications
| Brand | WHITE LIGHTNING |
|---|
Questions about this item
What dispensing gun do I need for the 9 oz cartridge?
Use any standard caulk gun that accepts a 9 fl oz cartridge to apply this adhesive.
Can I apply this acrylic adhesive over previously cured solvent-based sealant?
Yes, the acrylic base bonds to cured sealants if the surface is clean, dry and free of loose material.
How do I confirm the 10 minute working time is accurate on site?
Apply a test bead; it should remain toolable for about 10 minutes before skinning over.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



