Westward
Westward Welding Booth Kit Transparent PVC 6 ft W 6 ft H 13 oz
Transparent PVC welding booth kit spans 6 ft wide by 6 ft high with 13 oz panels rated to 150°F
- TypeWelding Protection
- Transparent tinted PVC lets light in while blocking UV
- 13 oz/sq yd material resists heat up to 150 °F
- Powder-coated steel frame with 1 in tubes stands 6 ft tall
- Platform legs extend 31 in for stable freestanding use
- Grommets with 3/8 in holes enable quick panel attachment
Welding Booth Kit 6 ft by 6 ft
This Westward kit provides a 6 ft wide by 6 ft high transparent PVC enclosure for welding operations. The yellow-tinted panels weigh 13 oz per square yard and are 0.36 mm thick with a UV inhibitor coating. Powder-coated steel platform legs measuring 31 in long and 1 in tube size form the frame. Grommets with a 3/8 in hole diameter at the centre allow fastening.
Suited for contained welding stations
The booth suits workshops needing a defined hot-work zone that blocks spatter and UV light while maintaining visibility through the tinted transparent panels. It is not for buyers who need an opaque barrier, a larger enclosure, or a frame without platform legs.
Maximum temperature 150 Degrees F
The PVC panels are rated to a maximum temperature of 150 Degrees F, which determines whether the booth can withstand the heat generated by the intended welding process. Exceeding this limit risks panel deformation or failure.
Highlights
- Transparent tinted PVC lets light in while blocking UV
- 13 oz/sq yd material resists heat up to 150 °F
- Powder-coated steel frame with 1 in tubes stands 6 ft tall
- Platform legs extend 31 in for stable freestanding use
- Grommets with 3/8 in holes enable quick panel attachment
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Welding Protection |
Questions about this item
What floor space does the 6 ft wide by 6 ft high booth need?
The frame uses platform legs that are 31 in long, so allow at least 6 ft of width and roughly 2.5 ft of depth for the leg footprint.
How are the PVC panels attached to the steel frame?
Panels have grommets with a 3/8 in hole diameter positioned at the centre; fasten each grommet to the 1 in steel tube frame with ties or bolts.
When should the 13 oz PVC panels be replaced?
Replace panels if the yellow tinted transparent material cracks, the UV inhibitor coating degrades, or the material is exposed above its 150 °F maximum temperature rating.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



