We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black fiberglass welding blanket 6 ft square with brass grommets on each corner

Westward

Westward Welding Blanket 6 ft x 6 ft 28 oz/sq yd

SKU CH-45AE-16XGF

Fiberglass welding blanket rated to 1,000 °F with brass grommets on 24 in centers

  • TypeWelding Protection
  • Withstands 1,000 °F for heavy-duty welding protection
  • 28 oz/sq yd fiberglass resists spatter and slag
  • Acrylic coating adds durability and flame resistance
  • FM Approved and NFPA 701 certified for safety
  • Brass grommets every 24 in allow secure fastening

Welding Blanket 6 ft x 6 ft

This ZORO SELECT welding blanket measures six feet by six feet and uses a black fiberglass material with an acrylic coating. It weighs twenty-eight ounces per square yard and is rated for medium duty. The blanket withstands a maximum temperature of one thousand degrees Fahrenheit.

Grommet Layout for Mounting

Brass grommets are placed on each corner with two per corner and a spacing of twenty-four inches. The grommet hole diameter is nineteen sixty-fourths of an inch. This arrangement allows the blanket to be hung or secured over work areas without additional fasteners.

FM Approved and NFPA 701 Compliant

The blanket meets FM Approved and NFPA 701 standards for fire protection. A Proposition 65 warning applies because the product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Thickness is zero point zero six inches.

Highlights

  • Withstands 1,000 °F for heavy-duty welding protection
  • 28 oz/sq yd fiberglass resists spatter and slag
  • Acrylic coating adds durability and flame resistance
  • FM Approved and NFPA 701 certified for safety
  • Brass grommets every 24 in allow secure fastening

Specifications

BrandZORO SELECT
TypeWelding Protection

Questions about this item

How long before the 1,000 °F rating degrades under continuous welding?

The blanket is rated for 1,000 °F maximum temperature; sustained exposure at or near that limit will gradually reduce protective performance, so monitor for brittleness or discoloration and replace when the fiberglass shows wear.

What heat or fumes does the acrylic coating release during all-day use?

The acrylic-coated fiberglass meets FM Approved and NFPA 701 fire-test standards, so it resists flame spread and emits minimal smoke; ensure normal shop ventilation for any welding fumes.

What mounting hardware is needed for the 19/64 in brass grommets on 24 in centres?

Use hooks, bolts, chains or cable ties that fit a 19/64 in hole; the four corner grommets are spaced 24 in apart for secure suspension.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.