We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Westward torque nutdriver with 1/4 inch hex drive and adjustable scale

Westward

Westward 6PAF4 Torque Nutdriver 1/4" 0.88–17.70 in.-lb

SKU CH-WRWA-78PJR MPN 6PAF4

A torque screwdriver with a 1/4" drive and 0.88 to 17.70 in.-lb range includes a calibration certificate

  • TypeHex Drive Bits
  • Precise torque range from 0.88 to 17.70 in.-lb
  • 01 in.-lb increment for fine adjustment
  • Audible click signals reached torque value
  • 1/4 in. drive accepts replaceable bits
  • Calibration certificate included for traceability

Torque Nutdriver 0.88–17.70 in.-lb

The Westward 6PAF4 is a precision hand tool designed for technicians who must apply a specific clamping force. It covers a torque range of 0.88 to 17.70 in.-lb with an audible click signal. A calibration certificate is included with each unit.

1/4 in hex drive with replaceable bits

The driver accepts standard 1/4 in hex bits and ships with a Phillips tip installed. Bits can be swapped quickly for different fastener profiles without removing the tool from the work area.

Adjustable inch-pound scale for light assembly

The micrometer-style scale adjusts in 0.01 in-lb increments across the full range. It handles delicate electronics and small mechanical fasteners but is not suited for higher-torque automotive or structural bolts.

Highlights

  • Precise torque range from 0.88 to 17.70 in.-lb
  • 01 in.-lb increment for fine adjustment
  • Audible click signals reached torque value
  • 1/4 in. drive accepts replaceable bits
  • Calibration certificate included for traceability

Specifications

BrandWestward
Model6PAF4
TypeHex Drive Bits

Questions about this item

What does the 0.88–17.70 in.-lb range mean when I am tightening a fastener?

It means the driver will click or slip once the applied torque reaches any value you set between 0.88 and 17.70 inch-pounds, preventing over-tightening.

How does the 1/4-inch hex drive limit the bits I can use?

Only bits with a 1/4-inch hex shank will lock into the driver; larger or smaller shanks will not engage.

What clearance does the tool need to fit onto a fastener?

The 1/4-inch drive size requires enough space around the fastener head for the driver body and the inserted bit to seat fully.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.