We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A 12-piece carbide bur set with assorted head shapes in a case

Westward

Westward 2LYR6 Carbide Bur Set Double Cut 1/4 Inch 12 Pieces

SKU CH-2WAH-39TQZ

A 12-piece carbide bur set with double-cut profiles in ball, cone, cylinder, flame, inverted cone, oval, tree and round nose tree shapes for machining brass, bronze, copper, nickel, titanium and zinc

  • TypeAngle, Pitch & Slope Locators
  • 12-piece carbide set covers ball, cone, cylinder, flame, inverted cone, oval, tree and round-nose tree profiles
  • Double-cut flutes remove material quickly on brass, bronze, copper, nickel, titanium and zinc
  • Bright uncoated carbide resists loading and runs cool during extended use
  • 1/4-inch head diameter on every bur fits standard die-grinder collets without adapters
  • Trade-numbered assortment (SA-1 through SN-1) simplifies reordering and job planning

Carbide Bur Set for Precision Metalwork

This 12-piece carbide bur set from Westward is designed for shaping, deburring and finishing brass, bronze, copper, nickel, titanium and zinc. The double-cut pattern on each head delivers smooth material removal and reduced chip loading for machinists, fabricators and maintenance technicians who need clean results on non-ferrous metals.

Thermals, Noise and Power Draw

As a hand-operated rotary tool accessory, the set produces no self-generated heat, noise or electrical draw; all thermal and acoustic output depends entirely on the die grinder or rotary tool driving the burs. The bright, uncoated carbide heads resist loading and run cool under normal feed rates, keeping the workpiece and tool interface manageable during extended use.

Double-Cut Geometry Decides Suitability

The double-cut flute geometry is the single specification that determines whether this set matches the job; it excels on the listed non-ferrous alloys but is not optimised for hardened steels, stainless alloys or heavy stock removal on ferrous materials where single-cut or aluminium-cut profiles would perform better.

Highlights

  • 12-piece carbide set covers ball, cone, cylinder, flame, inverted cone, oval, tree and round-nose tree profiles
  • Double-cut flutes remove material quickly on brass, bronze, copper, nickel, titanium and zinc
  • Bright uncoated carbide resists loading and runs cool during extended use
  • 1/4-inch head diameter on every bur fits standard die-grinder collets without adapters
  • Trade-numbered assortment (SA-1 through SN-1) simplifies reordering and job planning

Specifications

BrandWestward
TypeAngle, Pitch & Slope Locators

Questions about this item

How do I install these 1/4 inch carbide burs into my rotary tool, and what step causes problems?

Insert the 1/4 inch shank fully into the collet and tighten securely; the common error is leaving a gap that lets the bur run out of true under load.

What maintenance or replacement will this 12-piece double-cut set need later?

The bright uncoated carbide edges dull with use on brass, bronze, copper, nickel, titanium and zinc; replace individual burs when cutting efficiency drops.

What limit appears first during sustained cutting with these SA-1 through SN-1 shapes?

Heat buildup in the uncoated carbide heads reduces edge life fastest during continuous high-speed work on the listed metals.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.