We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black fiberglass welding blanket with brass grommets on each corner

Westward

Westward 22RN91 Welding Blanket 10 ft 10 ft 28 oz/sq yd

SKU CH-N9QE-94MYB

A 10 ft by 10 ft fibreglass welding blanket rated to 1,000 °F with acrylic coating, brass grommets and FM Approved NFPA 701 compliance

  • TypeWelding Protection
  • 10 ft x 10 ft coverage shields large work areas
  • 1,000 °F rating withstands intense welding heat
  • FM Approved and NFPA 701 certified for fire safety
  • 28 oz/sq yd fiberglass with acrylic coating resists sparks
  • Brass grommets every 24 in allow secure fastening

10 ft × 10 ft Fiberglass Welding Blanket

This 10 ft by 10 ft welding blanket uses fiberglass with an acrylic coating to shield work areas from spatter and slag. It is rated for a maximum temperature of 1,000 degrees F and carries FM Approved and NFPA 701 standards. The 28 oz per square yard weight and 0.06 in thickness give it a medium duty rating for general fabrication tasks. Brass grommets on each corner allow secure hanging or fastening.

Heat Resistance and Handling

The fiberglass material withstands continuous exposure up to 1,000 degrees F without melting or igniting. Acrylic coating adds abrasion resistance while keeping the blanket flexible for draping over equipment. At 28 oz per square yard it is heavy enough to stay in place during overhead work yet light enough to reposition by hand. No power draw or noise is produced because the product is a passive safety barrier.

Sustained High-Temperature Use

Under prolonged welding or cutting operations the blanket maintains its integrity at the rated 1,000 degrees F limit. Grommets spaced 24 in apart with a 4/5 in hole diameter distribute tension evenly so corners do not tear during extended hangs. The brass grommets resist corrosion from repeated heat cycles. California Proposition 65 warnings apply for chemicals known to cause cancer and reproductive harm.

Highlights

  • 10 ft x 10 ft coverage shields large work areas
  • 1,000 °F rating withstands intense welding heat
  • FM Approved and NFPA 701 certified for fire safety
  • 28 oz/sq yd fiberglass with acrylic coating resists sparks
  • Brass grommets every 24 in allow secure fastening

Specifications

BrandZORO SELECT
TypeWelding Protection

Questions about this item

How do I hang the 10 ft by 10 ft blanket using the brass grommets without tearing the fiberglass?

Align the 24 in grommet spacing with your mounting points, insert hooks through the 4/5 in brass holes at each corner, and tension evenly so the 0.06 in thick acrylic-coated fiberglass does not concentrate stress on a single grommet.

Will the acrylic coating on the 28 oz/sq yd fiberglass degrade and require blanket replacement?

The acrylic coating can become brittle after repeated 1,000 °F exposure; inspect for flaking or stiffening and replace the blanket when the coating no longer repels spatter or the fiberglass shows fraying at the grommet edges.

At what point does the FM Approved, NFPA 701 rated blanket stop protecting during a long welding run?

The medium-duty rating and 1,000 °F maximum temperature define the limit; sustained heat above that level or prolonged direct flame contact will exceed the blanket’s protective capacity first.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.