We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cardboard box of 14 inch carbon steel welding electrodes 3/32 inch diameter 50 lb

Westward

Westward 20YD10 14 in Welding Electrode 3/32 in AWS E6011 50 lb

SKU CH-BW1W-RC0ZG

50 lb pack of 14 in carbon-steel E6011 electrodes for AC or DCEP stick welding in all positions

  • TypeWelding Supplies
  • Deep penetration from E6011 classification
  • All-position welding with AC and DCEP current
  • Strong 60 ksi tensile strength on carbon steel
  • 50 lb pack supplies extended project work
  • 14 in length suits standard electrode holders

14 in E6011 Carbon Steel Electrodes

Westward 20YD10 electrodes are 14 in long carbon steel stick electrodes classified AWS E6011. Each rod measures 3/32 in diameter and the package contains 50 lb of material. They operate on AC or DCEP current and are designed for carbon steel to carbon steel welding.

General fabrication and repair on carbon steel

These electrodes suit welders joining carbon steel in flat, horizontal, overhead, vertical-down and vertical-up positions. The 60 ksi tensile strength meets typical structural requirements. Buyers who need a different AWS classification, a larger or smaller diameter, or a non-carbon-steel consumable should look at something else.

AWS E6011 classification and 3/32 in diameter

The AWS E6011 designation confirms the electrode’s minimum 60 ksi tensile strength, 48 ksi yield strength and AC or DCEP polarity. The 3/32 in diameter and 14 in length determine deposition rate and fit with standard holders. Verify that your procedure calls for E6011 and this diameter before purchasing.

Highlights

  • Deep penetration from E6011 classification
  • All-position welding with AC and DCEP current
  • Strong 60 ksi tensile strength on carbon steel
  • 50 lb pack supplies extended project work
  • 14 in length suits standard electrode holders

Specifications

BrandWESTWARD
TypeWelding Supplies

Questions about this item

How can I confirm the 20YD10 electrodes are working correctly after starting a weld?

A proper weld shows smooth, consistent bead formation with good penetration on carbon steel using AC or DCEP current in flat, horizontal, overhead, vertical-down or vertical-up positions.

What comes in the 50 lb package and what must I supply separately?

The package contains 14 in long, 3/32 in diameter E6011 carbon steel stick electrodes only; you must provide a compatible SMAW power source, electrode holder, cables and personal protective equipment.

Which electrode specification should I choose for general carbon steel fabrication?

Select the AWS E6011 classification with 3/32 in diameter and 14 in length; it delivers 60 ksi tensile strength, 48 ksi yield strength and runs on AC or DCEP current in all listed welding positions.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.