We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cardboard box of 50 lb welding electrodes 3/32 inch diameter 14 inch length

Westward

Westward 20YD03 Welding Electrode 3/32" 14" 50 lb E6010

SKU CH-MD3F-DWGXA

Carbon-steel stick electrodes for all-position SMAW, 3/32 in diameter, 14 in length, 50 lb pack

  • TypeTraffic & Parking Lot
  • Deep penetration on carbon steel backed by E6010 classification
  • Strong welds with 60 ksi tensile strength as welded
  • Versatile all-position use including vertical-down and overhead
  • 50 lb pack supplies extended welding jobs
  • 3/32 in diameter fits 14 in electrode holders

E6010 Electrode 3/32" 50 lb

This Westward stick electrode carries AWS E6010 classification for carbon steel welding. It measures 3/32 inch diameter by 14 inches long and ships in a 50 pound package. The minimum tensile strength is 60 ksi with yield strength at 48 ksi. It runs on DCEP current.

Flat Horizontal Overhead Vertical Welding

The rod suits flat, horizontal, overhead and vertical-up or vertical-down positions. Welders who need AC polarity or a different AWS class should select another product. It is not for non-ferrous metals or applications requiring low-hydrogen deposit. Buyers needing smaller quantities will want a different pack size.

3/32 Inch Diameter 14 Inch Length

The 3/32 inch diameter and 14 inch length determine fit in the holder and deposition rate. These dimensions decide whether the electrode matches the joint design and amperage range on hand. Verify the size against the procedure specification before ordering.

Highlights

  • Deep penetration on carbon steel backed by E6010 classification
  • Strong welds with 60 ksi tensile strength as welded
  • Versatile all-position use including vertical-down and overhead
  • 50 lb pack supplies extended welding jobs
  • 3/32 in diameter fits 14 in electrode holders

Specifications

BrandWESTWARD
TypeTraffic & Parking Lot

Questions about this item

What does the 60 ksi tensile strength mean once the electrode is used in a real weld?

The as-welded deposit meets a minimum 60 ksi tensile strength, matching the AWS E6010 classification requirement for carbon-steel joints.

How does the DCEP current designation limit the power sources I can use?

DCEP means the electrode must be run on direct current electrode positive; machines that only output AC cannot be used with this rod.

Will the 14 in length and 3/32 in diameter fit my standard SMAW holder and typical joint access?

The 14 in length and 3/32 in diameter are standard SMAW dimensions, so they fit common electrode holders and reach most flat, horizontal, vertical-up, vertical-down and overhead joints.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.