We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue plastic spool with 33 lb of 0.035 in low-alloy steel MIG welding wire

Westward

Westward 20AP74 MIG Welding Wire 0.035" 33 lb

SKU CH-RWGE-4MPFE

33 lb spool of 0.035 in low-alloy steel MIG wire rated at 80 ksi tensile and 68 ksi yield for ASTM-grade steel

  • Low-alloy steel wire joins matching ASTM-grade steels
  • ER80S-D2 classification meets 80 ksi tensile strength
  • 68 ksi minimum yield strength supports structural loads
  • 035 in diameter suits standard MIG guns
  • 33 lb plastic spool feeds smoothly in GMAW process

Purpose & Audience

Westward 20AP74 MIG welding wire is a 33 lb spool of 0.035 in diameter ER80S-D2 low-alloy steel filler metal. It is designed for fabricators and maintenance welders joining low-alloy steel grades such as ASTM A182, A217, A234, A335 and A336 using the GMAW process with DCEP polarity.

Upgrade Context

The wire replaces lower-strength mild-steel fillers when the joint requires a minimum 80 ksi tensile strength and 68 ksi yield strength as welded. The jump is worth it when the base material specification demands the higher mechanical properties listed for these ASTM grades.

Compatibility Check

Verify that your wire feeder accepts plastic spools and can handle 0.035 in diameter wire. Confirm the power source is set for DCEP output and that the shielding gas mix is appropriate for ER80S-D2 low-alloy steel welding. Check local regulations regarding the Proposition 65 warning for this product.

Highlights

  • Low-alloy steel wire joins matching ASTM-grade steels
  • ER80S-D2 classification meets 80 ksi tensile strength
  • 68 ksi minimum yield strength supports structural loads
  • 035 in diameter suits standard MIG guns
  • 33 lb plastic spool feeds smoothly in GMAW process

Specifications

BrandWESTWARD

Questions about this item

What wire diameter and spool weight does the Westward 20AP74 use?

The wire is 0.035 in diameter and comes on a 33 lb plastic spool.

Which welding current setting is required for this ER80S-D2 wire?

The wire is designated for DCEP polarity during MIG welding.

What tensile strength does the as-welded deposit provide?

The as-welded tensile strength is 80 ksi with a minimum yield of 68 ksi.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.