We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Westward siphon blast kit with 10 ft hose and ceramic nozzles

Westward

Westward 10Z911 Siphon Blast Kit 6.2 cfm 10 ft hose

SKU CH-3XV3-0RTNV

Siphon blast kit delivers up to 6.2 cfm airflow with a 10 ft hose and four ceramic nozzles for abrasive cleaning

  • Siphon-feed design draws abrasive without a pressure pot
  • 2 cfm maximum air flow cleans surfaces efficiently
  • Ceramic nozzles in 4 mm to 7 mm sizes resist wear
  • 10 ft hose gives reach around large workpieces
  • Operates from 40 psi to 125 psi with standard shop air

Siphon blast kit for surface preparation

The Westward 10Z911 siphon blast kit delivers 6.2 cfm maximum air flow through a 10 ft hose. It operates between 40 psi and 125 psi using a 1/4 in NPT connector. Ceramic nozzles in 4 mm, 5 mm, 6 mm and 7 mm inner diameters are included for varied abrasive tasks.

Replaces manual sanding and smaller blast guns

The siphon feed design upgrades hand sanding for rust, paint and scale removal on metal surfaces. The jump is worth it when a consistent abrasive stream cuts preparation time on larger panels or frames. It is not for buyers who need a pressure-fed system for heavy industrial throughput.

Simple assembly with included hex wrench

The kit includes the siphon gun, steel pick-up tube, 3/16 in ceramic nozzle and hex wrench for quick setup. Connect the 10 ft hose to a compatible air supply at the required pressure range. Common issues arise if air pressure falls below 40 psi or if abrasive media clogs the ceramic nozzle during extended use.

Highlights

  • Siphon-feed design draws abrasive without a pressure pot
  • 2 cfm maximum air flow cleans surfaces efficiently
  • Ceramic nozzles in 4 mm to 7 mm sizes resist wear
  • 10 ft hose gives reach around large workpieces
  • Operates from 40 psi to 125 psi with standard shop air

Specifications

BrandWESTWARD

Questions about this item

What air compressor flow and pressure does the Westward 10Z911 siphon blast kit require?

The kit operates at a maximum of 6.2 cfm and needs an air supply between 40 psi and 125 psi.

How do the ceramic nozzles and steel pick-up tube connect to the siphon gun during assembly?

The kit includes 4 mm, 5 mm, 6 mm and 7 mm ceramic nozzles plus a 3/16 in ceramic nozzle; the hex wrench secures the chosen nozzle and the steel pick-up tube threads into the gun body.

When should the ceramic nozzles or pick-up tube be replaced during ongoing use?

Replace a ceramic nozzle when its inner diameter wears larger than the stated 4 mm, 5 mm, 6 mm or 7 mm size, and replace the steel pick-up tube if it develops cracks or blockage that disrupts abrasive flow.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.