Westward
Westward 10T920 pneumatic accessory M30x1.50 die
High-speed steel M30 x 1.50 mm adjustable threading die cuts external metric threads with a 2 1/2 inch outside diameter
- TypeDies & Taps
- MaterialHigh speed steel
- M30 x 1.5 mm metric threads cut precisely
- High-speed steel construction resists wear during threading
- 2 1/2 inch outside diameter fits standard die stocks
- Adjustable design allows fine thread-fit control
- Right-hand thread direction suits common fastening needs
Westward M30x1.50 threading die
The Westward 10T920 is a round threading die cut from high-speed steel for right-hand metric threads. It produces M30 threads with a 1.50 mm pitch and is supplied in a new, uncoated bright finish. Machinists and maintenance technicians use it to create or repair external threads on rods, bolts or pipe ends in workshop and field environments.
Fits 2 1/2 inch die stock or holder
The die has an outside diameter of 2 1/2 inches and a thickness of 3/4 inch, so it mounts in standard adjustable die stocks or machine holders that accept this size. Its adjustable split design lets the user open or close the cutting edges slightly for fit calibration before locking the set screws. No additional power tooling is required; the die is turned by hand or with a suitable wrench on the stock.
Cuts M30x1.50 external threads
Each pass forms a 30 mm diameter thread with 1.50 mm pitch, suitable for standard metric coarse fasteners in steel and similar alloys. The high-speed steel teeth retain hardness at cutting temperatures generated by hand or low-speed machine threading. The die does not cut internal threads, left-hand threads or pitches other than 1.50 mm, so separate tooling is needed for those variants.
Highlights
- M30 x 1.5 mm metric threads cut precisely
- High-speed steel construction resists wear during threading
- 2 1/2 inch outside diameter fits standard die stocks
- Adjustable design allows fine thread-fit control
- Right-hand thread direction suits common fastening needs
Specifications
| Brand | Westward |
|---|---|
| Model | 10T920 |
| Type | Dies & Taps |
| Material | High speed steel |
Questions about this item
How long does the 10T920 die last when cutting M30x1.5 threads continuously?
The high-speed steel construction resists wear during extended threading sessions, maintaining sharp cutting edges for repeated M30x1.50 thread production
Does the 10T920 generate excessive heat during all-day threading operations?
The uncoated bright finish and high-speed steel material dissipate heat effectively during sustained M30x1.50 thread cutting, reducing thermal buildup on the 2 1/2 inch diameter die body
What threading equipment is required to use the 10T920 M30x1.50 die?
A compatible 2 1/2 inch die stock or adjustable die holder is needed to secure the 3/4 inch thick round die for right-hand M30x1.50 metric threading
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SIEMENS
SIEMENS 52PP2D2AB 30 mm Illuminated Push Button Red 24 V LED 1NO/1NC
$179.99
0.00213172BTC
In stock