We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red stainless-steel proximity switch with M12 connector, IP67 rated

Wenglor

Wenglor TC66PC3 Proximity Switch PNP 1000 mm 10...30 V DC IP67 M12 electrician tool

SKU CH-Q6QP-CN2ZC MPN TC66PC3

Detects objects up to 1000 mm with an infrared PNP sensor, IP67 stainless-steel housing and M12 connection for reliable industrial use

  • TypeTest Equipment
  • Color/FinishRed
  • Item Count1 pack
  • Selling UnitBox
  • Parts3 Years
  • Labor1 Year
  • 1000 mm sensing range detects distant objects
  • PNP NO/NC switchable output fits diverse control logic
  • IP67 stainless steel housing withstands harsh environments
  • ..30 V DC supply with short-circuit and reverse polarity protection
  • 1 kHz switching frequency enables fast response cycles

Proximity Switch 1000 mm Range

The Wenglor TC66PC3 is a PNP proximity switch with a 1000 mm sensing range and infrared light source. It operates on a 10...30 V DC supply and features an M12 × 1, 4-pin connection housed in stainless steel with full encapsulation.

Suited for industrial detection tasks needing IP67

This switch suits automation systems that require PNP NO/NC selectable output, short-circuit and reverse-polarity protection, and a 1 kHz switching frequency. It is not for applications needing a sensing distance beyond 1000 mm or a supply voltage outside the 10...30 V DC window.

Potentiometer setting with 12 ° opening angle

The single specification that decides fit is the 12 ° opening angle combined with potentiometer adjustment, which determines the detection cone and alignment precision for the intended target.

Highlights

  • 1000 mm sensing range detects distant objects
  • PNP NO/NC switchable output fits diverse control logic
  • IP67 stainless steel housing withstands harsh environments
  • ..30 V DC supply with short-circuit and reverse polarity protection
  • 1 kHz switching frequency enables fast response cycles

Specifications

BrandWenglor
ModelTC66PC3
TypeTest Equipment
Color/FinishRed
Item Count1 pack
Selling UnitBox
Parts3 Years
Labor1 Year

Questions about this item

What sensing distance does the TC66PC3 achieve with its infrared light source?

The TC66PC3 detects objects up to 1000 mm using an infrared light source with a 12 ° opening angle and less than 15 % switching hysteresis.

What supply voltage and connection type does the TC66PC3 require for mounting?

It operates on 10...30 V DC and connects via an M12 × 1, 4-pin connector; the stainless-steel housing is fully encapsulated and rated IP67.

How do I set the switching point on the TC66PC3, and what common mistake should I avoid?

Adjust the built-in potentiometer to set the switching point; ensure the output is configured for the required NO or NC mode, as the switch is PNP NO/NC switchable.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.