We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red cylindrical inductive sensor with M12 connector and potentiometer adjustment

Wenglor

Wenglor EO95VD3N inductive sensor PNP NC 5000 mm range 10...30 V DC IP67

SKU CH-DPTX-FQQ22 MPN EO95VD3N

Inductive proximity sensor detects metal at 5000 mm with PNP normally-closed output, 10...30 V DC supply and IP67-rated nickel-plated brass housing

  • TypeTest Equipment
  • Color/FinishRed
  • Item Count1 pack
  • Selling UnitBox
  • Parts3 Years
  • Labor1 Year
  • 5 m sensing range detects targets at distance
  • PNP normally-closed output simplifies control logic
  • 10–30 V DC supply fits standard industrial power
  • IP67 rated housing resists dust and water ingress
  • 100 000 h service life reduces replacement frequency

Industrial sensing range

The Wenglor EO95VD3N is an inductive proximity sensor built for factory automation and machine-monitoring tasks that require long-range detection. Its 5000 mm sensing distance suits conveyors, positioning systems and safety zones where the target cannot be approached closely.

Potentiometer adjustment and full encapsulation

A built-in potentiometer lets technicians set the exact switching point without external tools, while full encapsulation and an IP67-rated nickel-plated brass housing protect the electronics against oil, coolant and temporary immersion. PNP normally-closed output and short-circuit protection simplify wiring into standard 10...30 V DC control circuits.

500 Hz switching with 1 ms response

The sensor switches at up to 500 Hz with a 1 ms response time, handling fast-moving parts on packaging lines or rotary tables. Temperature drift stays below 10 % across -10...60 °C, and the 200 mA output drives relays or PLC inputs directly; it is not suited for applications needing analogue distance data or higher switching currents.

Highlights

  • 5 m sensing range detects targets at distance
  • PNP normally-closed output simplifies control logic
  • 10–30 V DC supply fits standard industrial power
  • IP67 rated housing resists dust and water ingress
  • 100 000 h service life reduces replacement frequency

Specifications

BrandWenglor
ModelEO95VD3N
TypeTest Equipment
Color/FinishRed
Item Count1 pack
Selling UnitBox
Parts3 Years
Labor1 Year

Questions about this item

Will the potentiometer on the EO95VD3N need periodic recalibration over its 100000 hour service life?

The potentiometer allows initial range adjustment up to 5000 mm; with temperature drift under 10 % and hysteresis below 15 %, routine recalibration is not required during the rated 100000 h life at 25 °C.

What is the first limit reached when the sensor runs continuously at its 500 Hz switching frequency?

The 200 mA switching current limit is reached first; exceeding it triggers the built-in short-circuit and overload protection, while the 1 ms response time and < 40 mA consumption at 24 V remain within spec.

How much heat does the nickel-plated CuZn housing dissipate when the EO95VD3N operates all day at 30 V DC?

At 30 V DC the sensor draws under 40 mA, so power dissipation stays below 1,2 W; the IP67-rated, fully encapsulated housing handles this without overtemperature in the -10...60 °C ambient range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.