We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Weller chisel soldering tip 1.2 mm silver metal cylinder

Weller

Weller T0054486099 Chisel Soldering Tip 1.2 mm

SKU CH-6WHK-FN15C

Chisel soldering tip with 1.2 mm width, 28 mm length, 850 °F rating, and 4.75 mm outside diameter for Weller WP 65, WTP 90, WXP 65 and WXP 90 handpieces

  • TypeWelding Parts & Supplies
  • Chisel profile delivers broad heat for fast joints — 1.2 mm tip width
  • 28 mm tip length reaches into tight assemblies — 4.75 mm outside diameter
  • 4 mm thickness gives quick thermal response — 850 °F max operating temperature
  • Fits Weller WP 65, WTP 90, WXP 65, WXP 90 handpieces — compatible with WT1010N, WX1012, WXR3001, WXR3003 stations

Weller Chisel Soldering Tip 1.2 mm

This Weller chisel soldering tip measures 1.2 mm wide and 28 mm long with a 4.75 mm outside diameter and 0.4 mm thickness. It belongs to the XNT tip series and is designed for general soldering applications with compatible Weller handpieces. The tip is new and not ESD safe.

Check handpiece and station compatibility

Verify that your handpiece matches the WP 65, WTP 90, WXP 65 or WXP 90 models before ordering. The tip also requires a compatible station such as WT1010N, WX1012, WX1012N, WXR3001, WXR3001N, WXR3003 or WXR3003N. Using an unlisted handpiece or station will prevent proper fit and function.

Behaviour under sustained load

The tip is rated for a maximum operating temperature of 850 degrees Fahrenheit during continuous use. Its chisel geometry and 0.4 mm thickness provide stable thermal transfer for extended soldering sessions. The XNT series construction maintains consistent heat delivery without the rapid temperature drop seen in shorter bursts.

Highlights

  • Chisel profile delivers broad heat for fast joints — 1.2 mm tip width
  • 28 mm tip length reaches into tight assemblies — 4.75 mm outside diameter
  • 4 mm thickness gives quick thermal response — 850 °F max operating temperature
  • Fits Weller WP 65, WTP 90, WXP 65, WXP 90 handpieces — compatible with WT1010N, WX1012, WXR3001, WXR3003 stations

Specifications

BrandWELLER
TypeWelding Parts & Supplies

Questions about this item

Does the box contain only the 1.2 mm chisel tip or are extra nozzles included?

The package supplies the single XNT-series chisel tip measuring 1.2 mm wide, 28 mm long and 0.4 mm thick with a 4.75 mm outer diameter. No additional nozzles or accessories are bundled.

Which handpiece models does the XNT 1.2 mm tip fit?

It mounts on Weller WP 65, WTP 90, WXP 65 and WXP 90 handpieces and works with WT1010N, WX1012, WX1012N, WXR3001, WXR3001N, WXR3003 and WXR3003N stations.

What does the 850 °F maximum temperature mean for everyday soldering?

The tip is rated for up to 850 °F, so it handles standard lead-free and leaded solder joints on typical electronics work without exceeding its thermal limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.