Weller
Weller T0054443699 Soldering Tip Conical .2 mm 15 mm
Conical soldering tip with 0.2 mm tip width and 15 mm length for Weller WP 80, WSP 80 and compatible stations
- TypeWelding Parts & Supplies
- Conical .2 mm tip enables fine-pitch soldering
- 15 mm length reaches tight component spacing
- Iron-plated copper construction resists wear at 850 Degrees F
- Compatible with Weller WP 80, WSP 80 and WXP 80 handpieces
- Fits WD1002, WR2000VX and WR3000 series stations
Conical tip for precision soldering
The Weller T0054443699 is a conical soldering tip with a .2 mm width and 15 mm length. It fits Weller handpieces including WP 80, WSP 80, WSP 80N and WXP 80. The iron-plated copper construction withstands a maximum operating temperature of 850 Degrees F. This tip suits technicians working on fine-pitch components and delicate board work.
LT series compatibility across stations
The tip belongs to the LT series and works with stations WD1002, WD1002T, WR2000VX, WR3000M, WR3000SA, WR3000TA, WT1012, WT1013 and WT1013N. No additional accessories or software are bundled with the tip itself. Buyers who need a chisel or bevel profile for broader joints must select a different LT-series tip.
Temperature and ESD limits
The 850 Degrees F ceiling restricts use to standard leaded and lead-free alloys within that range. The tip is not ESD safe, so it is unsuitable for static-sensitive assemblies that require grounded tooling. The 4.6 mm outside diameter limits access in extremely crowded layouts where a narrower shank is required.
Highlights
- Conical .2 mm tip enables fine-pitch soldering
- 15 mm length reaches tight component spacing
- Iron-plated copper construction resists wear at 850 Degrees F
- Compatible with Weller WP 80, WSP 80 and WXP 80 handpieces
- Fits WD1002, WR2000VX and WR3000 series stations
Specifications
| Brand | WELLER |
|---|---|
| Type | Welding Parts & Supplies |
Questions about this item
How often will the 0.2 mm conical tip need replacement under daily soldering?
The iron-plated copper tip wears with use; replace it when the plating erodes or the 0.2 mm point no longer wets solder cleanly.
What limit appears first during continuous operation at the 850 °F maximum temperature?
Tip oxidation and plating loss accelerate at the 850 °F ceiling, so temperature control and regular cleaning become the practical limit.
Does the 4.6 mm diameter tip run hot enough to need extra cooling during all-day use?
The tip itself reaches the station’s 850 °F setting; heat management depends on the station’s thermal design, not the tip alone.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SIEMENS
SIEMENS 52PP2D2AB 30 mm Illuminated Push Button Red 24 V LED 1NO/1NC
$179.99
0.00212759BTC
In stock