We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Weller XT chisel soldering tip 0.8 mm 2.4 mm wide 36 mm long

Weller

Weller Soldering Tip Chisel XTB 0.8 mm WP 120 WXP 120

SKU CH-WKEZ-2G36Q

Chisel soldering tip with a 0.8 mm thickness and 2.4 mm width for Weller WP 120 and WXP 120 handpieces

  • TypeWelding Parts & Supplies
  • Chisel tip 0.8 mm thick for fine joints
  • 4 mm wide face spreads heat evenly
  • 36 mm length reaches tight board areas
  • 850 °F max temperature handles lead-free solder
  • Fits WP 120 and WXP 120 handpieces

Soldering Tip for Weller WP 120 and WXP 120

This chisel tip belongs to the XT series and fits Weller WP 120 and WXP 120 handpieces. It is designed for general soldering tasks on compatible stations. The tip width measures 2.4 mm and the tip length is 36 mm. It is not ESD safe.

Maximum operating temperature 850 degrees F

The tip withstands a maximum operating temperature of 850 degrees F during use. This limit defines the thermal envelope for the XT series tip on supported stations. Exceeding this temperature may damage the tip or affect solder joint quality. Ensure the station settings stay within this range.

Tip thickness 0.8 mm decides suitability

The chisel tip has a thickness of 0.8 mm, which determines the contact area and heat transfer for each joint. Buyers needing a finer or broader tip profile should select a different XT series variant. This dimension is the primary factor in choosing the correct tip for the work.

Highlights

  • Chisel tip 0.8 mm thick for fine joints
  • 4 mm wide face spreads heat evenly
  • 36 mm length reaches tight board areas
  • 850 °F max temperature handles lead-free solder
  • Fits WP 120 and WXP 120 handpieces

Specifications

BrandWELLER
TypeWelding Parts & Supplies

Questions about this item

Which Weller tip series and chisel width suit the WP 120 or WXP 120 handpiece?

The XT series chisel tip with a 2.4 mm width and 0.8 mm thickness fits WP 120 and WXP 120 handpieces, as listed for this tip.

What does the 850 Degrees F maximum operating temperature mean for daily soldering work?

It sets the upper heat limit the tip can withstand; typical lead-free soldering runs lower, so the tip handles standard jobs without overheating.

Which Weller stations accept this XT chisel tip via the compatible handpieces?

Stations WT1010H, WX1010, WX1010N, WX2020, WX2020N, WXD2020, WXD2020N, WXR3002 and WXR3002N work with the WP 120 or WXP 120 handpieces that take this tip.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.