Weller
Weller PTC7 Soldering Tip Screwdriver 0.125 in
A 3.2 mm wide screwdriver soldering tip with 0.8 mm thickness, 33 mm length and 700 °F rating for Weller WTCPT stations
- TypeWelding Parts & Supplies
- Screwdriver tip handles wide joints with 3.2 mm width
- Iron-plated copper construction withstands 700 °F operating heat
- 33 mm tip length reaches deep into tight assemblies
- Compatible with Weller WTCPT and TCP series stations
- 8 mm thickness balances thermal mass and precision control
Tip shape and width
The Weller PTC7 is a 0.125 in screwdriver-style soldering tip built for the PT series. It suits technicians and hobbyists who need a flat, chisel-like face for general through-hole and surface-mount work. The iron-plated copper construction withstands repeated heating cycles at up to 700 Degrees F. This tip is not intended for users who require a conical, bevel or hoof profile for fine-pitch or drag-soldering tasks.
Handpiece and station fit
The tip slides into compatible Weller handpieces including the TC201, TC201FE, TC201T, TCP, TCP 12, TCP 24, TCP 42 and TCPS models. It pairs with WTCP 51, WTCPN, WTCPS and WTCPT soldering stations, letting existing owners add a screwdriver profile without changing hardware. Builders using non-Weller handpieces or stations not listed above cannot mount this tip.
Accessory impact
No extra accessories or software are bundled with the tip. The package delivers only the single iron-plated copper tip measuring 3.2 mm in width, 33 mm in length and 0.8 mm in thickness. Users gain the new tip geometry immediately but must supply their own cleaning sponge, flux or tip tinner for maintenance.
Highlights
- Screwdriver tip handles wide joints with 3.2 mm width
- Iron-plated copper construction withstands 700 °F operating heat
- 33 mm tip length reaches deep into tight assemblies
- Compatible with Weller WTCPT and TCP series stations
- 8 mm thickness balances thermal mass and precision control
Specifications
| Brand | WELLER |
|---|---|
| Type | Welding Parts & Supplies |
Questions about this item
How long can the tip run at 700 Degrees F before the iron-plated copper degrades?
The iron-plated copper construction is rated for continuous operation at the 700 Degrees F maximum temperature; actual tip life depends on flux type, cleaning routine and how often the tip is tinned during all-day use.
Does the tip generate noticeable heat or noise at the handpiece during extended soldering sessions?
The tip itself is passive and produces no noise; heat at the handpiece stays within normal Weller TCP-series levels because the 3.2 mm diameter and 33 mm length match the station's thermal design.
Which Weller station and handpiece models must I already own for this PT-series screwdriver tip to fit?
Compatible stations are WTCP 51, WTCPN, WTCPS and WTCPT; compatible handpieces are TC201, TC201FE, TC201T, TCP, TCP 12, TCP 24, TCP 42 and TCPS.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SIEMENS
SIEMENS 52PP2D2AB 30 mm Illuminated Push Button Red 24 V LED 1NO/1NC
$179.99
0.00208066BTC
In stock