We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Weller LT chisel soldering tip, 1.6 mm wide, silver iron-plated copper

Weller

Weller LT Chisel Soldering Tip 1.6 mm 0.38 in

SKU CH-S8VS-V01RB

Chisel soldering tip, 1.6 mm wide, 13 mm long, .7 mm thick, for Weller WP 80, WSP 80, WSP 80N and WXP 80 handpieces on WD1002, WD1002T, WR2000VX, WR3000M, WR3000SA, WR3000SS, WR3000TA, WT1012.

  • TypeChisel
  • Chisel profile delivers precise heat transfer for broad joints
  • 6 mm tip width suits fine component work
  • 13 mm tip length reaches into tight board areas
  • Iron-plated copper construction resists wear at 850 °F
  • Compatible with Weller WP 80, WSP 80 and WD1002 stations

Chisel tip for LT series

The Weller LT chisel tip measures 1.6 mm wide and 13 mm long with a .7 mm thickness. It fits Weller handpieces such as the WP 80, WSP 80, WSP 80N and WXP 80. The iron-plated copper construction delivers consistent heat transfer for general soldering tasks. Buyers needing a finer point or a different profile should look elsewhere.

Fits WD1002 and WR stations

The tip mounts on WD1002, WD1002T, WR2000VX and WR3000 series stations without an adapter. Its 4.6 mm outside diameter matches the LT barrel so the existing handpiece stays in place. No station firmware change or extra hardware is required. Builders using non-Weller stations or older LT-incompatible handles cannot use this tip.

Sustained heat at 850 °F

The tip withstands a maximum operating temperature of 850 °F during prolonged joints or heavy copper pours. Iron plating resists erosion so the chisel face keeps its shape over long sessions. Short bursts do not stress the material any differently than steady work. Users who require ESD-safe tooling will need a different tip series.

Highlights

  • Chisel profile delivers precise heat transfer for broad joints
  • 6 mm tip width suits fine component work
  • 13 mm tip length reaches into tight board areas
  • Iron-plated copper construction resists wear at 850 °F
  • Compatible with Weller WP 80, WSP 80 and WD1002 stations

Specifications

BrandWeller
TypeChisel

Questions about this item

At what temperature does the 1.6 mm chisel tip reach its maximum operating limit?

The tip is rated for a maximum operating temperature of 850 degrees Fahrenheit.

How much heat does the LT chisel tip add to the handpiece during continuous use?

The iron-plated copper tip transfers heat efficiently to the joint while the handpiece remains within its normal operating range.

Which Weller handpiece or station must I already own to use this LT series tip?

It fits Weller handpieces WP 80, WSP 80, WSP 80N, WXP 80 and stations WD1002, WD1002T, WR2000VX, WR3000M, WR3000SA, WR3000TA, WT1012, WT1013, WT1013N.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.