We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White cylindrical 32 oz bottle with black cap and blue label

Weld-Aid

Weld-Aid 388-007094 Nozzle-Dip Gel 32 oz

SKU CH-CWCM-AR3SG MPN 388-007094

Gel formula prevents spatter build-up on nozzles and tips with a water-based, non-hazardous, bio-based composition in a 32 oz container

  • Water-based gel prevents spatter build-up on nozzles and tips
  • Bio-based formula contains no hazardous ingredients for safer handling
  • Non-flashing composition reduces fire risk during welding operations
  • Paintable surface allows coating without removal after application
  • Low 1.4 % VOC content meets strict air-quality requirements

Welding Nozzle Protection Gel

Weld-Aid 388-007094 is a water-based antispatter gel designed to prevent spatter build-up on welding nozzles and tips. The 32 oz container supplies enough gel for extended workshop use. Its bio-based, non-hazardous formula makes it suitable for environments where safety and cleanliness are priorities. The paintable residue allows for immediate post-weld coating without additional cleaning steps.

Thermal and Power Characteristics

The gel operates without flashing, reducing the risk of thermal incidents during application near hot surfaces. VOC content is limited to 1.4 percent, contributing to lower fume emissions in the work area. Being water-based and non-hazardous, it requires no special power or ventilation infrastructure for normal use. The chemical base remains stable at typical ambient workshop temperatures.

Sustained Load Behaviour

Under continuous welding cycles the gel maintains a consistent barrier that resists spatter accumulation over long runs. The non-flashing property ensures the coating does not degrade or ignite during prolonged exposure to heat. Bio-based composition supports repeated application without introducing hazardous buildup on equipment. The paintable film remains intact, allowing downstream finishing processes to proceed without interruption.

Highlights

  • Water-based gel prevents spatter build-up on nozzles and tips
  • Bio-based formula contains no hazardous ingredients for safer handling
  • Non-flashing composition reduces fire risk during welding operations
  • Paintable surface allows coating without removal after application
  • Low 1.4 % VOC content meets strict air-quality requirements

Specifications

BrandWeld-Aid / CRC
Model388-007094
Shipping weight1.34 kg
Package size254 × 76 × 25 mm

Questions about this item

How do I apply the Nozzle-Dip Gel 32 oz to my welding nozzle?

Dip the hot nozzle or tip into the gel to coat it; the water-based, bio-based formula prevents spatter build-up and is paintable after welding.

What maintenance does the 32 oz container require?

Keep the lid sealed between uses so the gel does not dry out; replace the container once the 32 oz supply is exhausted.

At what point does the 1.4 Percent VOC content become a concern during sustained welding?

The low 1.4 Percent VOC level means fumes stay minimal even during long sessions, but always ventilate the area and follow California Proposition 65 warnings.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.