We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Crimped brass wire end brush, silver finish, quarter-inch round shank

Weiler

Weiler 93804 Crimped Wire End Brush Brass 1 in

SKU CH-03H9-3A22Q

Crimped brass wire end brush, 1 inch diameter, fits 1/4 inch shank tools up to 22,000 RPM

  • Brass bristles resist sparking on sensitive metals
  • 1-inch diameter reaches tight cavities and corners
  • Crimped wire construction flexes without premature breakage
  • 1/4-inch round shank fits drills and grinders
  • Rated for 22,000 RPM maximum operating speed

Crimped brass end brush

The Weiler 93804 is a crimped wire end brush built for detail work on brass surfaces. It fits straight grinders, drills, impact drivers and pencil grinders that accept a 1/4 in round shank. The brush reaches a maximum speed of 22,000 RPM and measures 1 in across the bristle face with a 1 in trim length.

Build fit and clearance

The 1/4 in shank slips into standard collets and chucks without adapters. At 3 in overall length the brush keeps the motor housing clear of the workpiece on flat or contoured parts. Brass wire is softer than steel so it removes oxidation and light coatings without gouging the base metal.

Suited for light deburring and polishing

Users cleaning brass fittings, electrical contacts or decorative hardware will find the crimped wire compliant and non-sparking. Builders needing aggressive stock removal on hardened steel or heavy rust should choose a stiffer wire type. The brush is not intended for high-volume production lines that demand continuous-duty rated tools.

Highlights

  • Brass bristles resist sparking on sensitive metals
  • 1-inch diameter reaches tight cavities and corners
  • Crimped wire construction flexes without premature breakage
  • 1/4-inch round shank fits drills and grinders
  • Rated for 22,000 RPM maximum operating speed

Specifications

BrandWEILER

Questions about this item

What is the maximum RPM this end brush can handle under sustained use?

The brush is rated for a maximum operating speed of 22,000 RPM.

How much heat or noise does the brass wire generate during all-day operation?

Brass wire produces less friction heat than steel, reducing workpiece discoloration during extended runs.

Which shank size must my grinder or drill chuck accept for this brush to fit?

The brush uses a 1/4 in round shank, compatible with standard straight grinders, drills and impact drivers.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.