We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass 1-1/2 inch rotating ball valve with tee handle

Webstone

Webstone 41406HV 1-1/2" Brass Rotating Ball Valve 600 psi

SKU CH-1DNR-NP0HC

A 1-1/2" brass rotating ball valve rated for 600 psi service with gas, oil and water

  • Full-port brass ball handles gas, oil and water at 600 psi
  • 600 psi steam rating supports high-temperature lines
  • Two-piece brass body resists corrosion in demanding systems
  • Tee handle gives quick quarter-turn shut-off control
  • Model 41406HV meets Prop 65 chemical disclosure requirements

1-1/2" Brass Rotating Ball Valve 600 psi

The Webstone 41406HV is a new 1-1/2 inch brass rotating ball valve rated for 600 psi operating pressure. It suits installers and maintenance teams who need a full-port, two-piece body valve for gas, oil or water lines. The tee handle gives direct manual control in tight plant rooms or on mobile compressor skids.

Sustained pressure handling

The valve holds 600 psi across operating, steam and combustible-gas duties without a separate vacuum rating. Brass body and ball resist corrosion during long-term exposure to mixed media, while the straight, two-piece construction limits leak paths under continuous cycling. No vacuum service rating applies, so the component is not suited for deep-evacuation systems.

Upgrade from reduced-port or lower-rated valves

This unit replaces reduced-port valves that restrict flow in 1-1/2 inch pipework, and it supersedes valves rated below 600 psi where steam or combustible gas pressure demands the higher margin. The jump is worth it when full-bore flow and a single pressure rating across media simplify specification and inspection. Buyers who need a vacuum-rated valve or a three-way diverting pattern should look elsewhere.

Highlights

  • Full-port brass ball handles gas, oil and water at 600 psi
  • 600 psi steam rating supports high-temperature lines
  • Two-piece brass body resists corrosion in demanding systems
  • Tee handle gives quick quarter-turn shut-off control
  • Model 41406HV meets Prop 65 chemical disclosure requirements

Specifications

BrandWEBSTONE

Questions about this item

Does the 600 psi operating pressure generate noticeable vibration or heat during continuous use?

The valve is rated for 600 psi operating pressure and 600 psi steam pressure, so it handles sustained loads without vibration or heat buildup from the brass body and full-port ball.

What piping or fittings must I already have to install the 1-1/2" flanged connection?

You need matching 1-1/2" flanged pipe ends or compatible flanged fittings for the side connection; the valve uses a straight two-piece body with tee handle for manual operation.

Will the brass body and full-port ball work reliably with older steel or iron pipe threads in my system?

The brass construction suits gas, oil and water media, and the full-port ball maintains flow compatibility with existing steel or iron piping at the same nominal size.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.