We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small square 1.44 inch TFT LCD module with four buttons and female header pins

WaveShare

WaveShare 1.44" LCD Display 128×128 SPI ST7735S

SKU CH-F969-AQD4Q

1.44" TFT LCD module with 128×128 resolution and 65K RGB colours, SPI-driven ST7735S controller, direct Pico header fit, four user buttons, 3.15–5 V operation

  • CPU TypeOther
  • 44" colour display shows 65K RGB colours at 128×128 resolution
  • SPI interface uses minimal GPIO pins on Raspberry Pi Pico
  • Onboard female header fits Pico directly without extra wiring
  • Four built-in buttons give immediate user-input options
  • C/C++ and MicroPython demos accelerate software development

1.44" SPI LCD for Raspberry Pi Pico

This 1.44 inch TFT display module is built for the Raspberry Pi Pico and connects through its onboard female header. The panel delivers a 128×128 pixel resolution with 65K RGB colours for clear, colourful output. An embedded ST7735S driver handles the 4-wire SPI interface, keeping pin usage low. Four user buttons are included for direct interaction.

Compatibility and voltage check

Verify that your project uses a Raspberry Pi Pico or a board with the same header layout so the module can attach directly. The display operates from 3.15V to 5V, so confirm your supply sits inside that range. Ensure your firmware can drive a 4-wire SPI bus and that you have the required GPIO pins free for the screen and the four buttons.

Makers needing a compact Pico screen

This module suits hobbyists and developers who want a small colour display with built-in controls for Pico-based instruments, handhelds or status panels. It is not intended for projects that require a larger viewing area, higher pixel counts, touch input or a different connector style. Builders targeting other microcontroller platforms should look for a display with a matching pinout and driver support.

Highlights

  • 44" colour display shows 65K RGB colours at 128×128 resolution
  • SPI interface uses minimal GPIO pins on Raspberry Pi Pico
  • Onboard female header fits Pico directly without extra wiring
  • Four built-in buttons give immediate user-input options
  • C/C++ and MicroPython demos accelerate software development

Specifications

CPU TypeOther

Questions about this item

Does the 1.44" LCD module arrive with a Raspberry Pi Pico or any cables?

The board ships with an onboard female header that fits directly onto a Raspberry Pi Pico; the Pico itself and any jumper wires are not included.

Should I pick a different resolution or colour depth for this display?

The module is fixed at 128×128 pixels with 65K RGB colours; no alternative versions are offered.

What does the 128×128 pixel count mean when the screen is driven by a Pico over SPI?

The 1.44" TFT panel shows 128×128 pixels at 65K colours through a 4-wire SPI link, operating from 3.15 V to 5 V, and includes four user buttons for input.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.