We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact bench power supply with dual rotary encoders, USB-A and USB-C ports, four-digit display, dark metal chassis

WANPTEK DPS 0-30V 0-5A Bench Power Supply with Encoder Knob

SKU CH-SCYR-Q78ES

Adjustable 0-30 V, 0-5 A bench supply with coarse and fine encoder knobs, USB-A and Type-C fast-charge ports, and short-circuit alarm

  • Watts25 watts
  • Surge Wats25 watts
  • Engine BrandWANPTEK POWER
  • Voltage125VAC
  • Size/Dimensions13.589 cm x 19.5072 cm x 26.4922 cm
  • Input Amps25 watts
  • Coarse and fine encoder knobs enable precise voltage and current adjustment
  • USB-A and Type-C ports deliver up to 5 V 3.6 A fast charging
  • Automatic 115 V or 230 V input selection suits global mains supply
  • Over-current protection with audible alarm cuts output on short circuits
  • Compact 13.589 × 19.5072 × 26.4922 cm bench footprint fits crowded workspaces

DC bench supply for lab and repair

The WANPTEK DPS series is a new adjustable DC power supply rated at 25 W with a 0–30 V and 0–5 A output range. It accepts 125 VAC input and automatically switches between 115 V and 230 V ±10 % mains. Coarse and fine encoder knobs let you set voltage and current in two steps, while a four-digit display shows the values.

Suits hobbyists, students

The USB-A and USB-C ports deliver 5 V at 3.6 A for charging phones or powering USB devices under test. Over-current, over-voltage, over-temperature, short-circuit and leakage protections shut down output and sound an alarm when a fault occurs. Buyers who need more than 25 W or higher current should look at a larger unit.

25 W total power budget decides fit

The supply provides up to 30 V at 5 A but cannot exceed 25 W continuous, so the maximum current drops as voltage rises. Verify that your circuit stays within this envelope before purchasing.

Highlights

  • Coarse and fine encoder knobs enable precise voltage and current adjustment
  • USB-A and Type-C ports deliver up to 5 V 3.6 A fast charging
  • Automatic 115 V or 230 V input selection suits global mains supply
  • Over-current protection with audible alarm cuts output on short circuits
  • Compact 13.589 × 19.5072 × 26.4922 cm bench footprint fits crowded workspaces

Specifications

Watts25 watts
Surge Wats25 watts
Engine BrandWANPTEK POWER
Voltage125VAC
Size/Dimensions13.589 cm x 19.5072 cm x 26.4922 cm
Input Amps25 watts
SeriesDPS
Compatibility/FitmentOut-Opening, Narrow Stile, Store Front Doors
Primary Openings1
FeaturesWidely Use
Parts1 Year
Labor1 Year

Questions about this item

What bench space does the 13.589 cm x 19.5072 cm x 26.4922 cm unit need?

The supply measures 13.589 cm wide, 19.5072 cm deep and 26.4922 cm high, so allow that footprint plus a few centimetres for cable bend radius and ventilation.

How do I set a precise voltage with the coarse and fine encoder knobs?

Turn the coarse knob to set the whole-volt digit, then turn the fine knob to dial in the decimal places; the four-digit display shows the result in real time.

When should I expect to replace the internal cooling fan?

The fan is rated for continuous operation at the 25 W design load; under normal bench use it typically lasts several years before bearing noise signals a swap.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.