We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver annular core cutter with Weldon shank, 11/16 by 1 inches

Walter Surface Technologies

Walter Surface Technologies 05B011 11/16 X 1 Icecut Annular Core Cutters Weldon Shank pneumatic accessory

SKU CH-BASB-QFK3Z

Aluminium-chromium coated annular cutters for dry drilling with a Weldon shank

  • Cuts without lubricants thanks to AICrN coating
  • Withstands 200°C higher temps than TiAlN cutters
  • Produces less heat under load than conventional cutters
  • Resists high stress and impact with chromium-aluminum blend
  • 11/16 x 1 inch Weldon shank fits pneumatic tools

Icecut Annular Core Cutters

The Walter Surface Technologies 05B011 annular core cutters feature a Weldon shank for use with magnetic drill presses in metal fabrication and maintenance work. The 11/16 inch by 1 inch cutting geometry suits structural steel, plate and pipe applications where clean, accurate holes are required.

Exclusive AICrN coating

An aluminium-chromium nitride coating replaces conventional TiN or TiAlN layers and allows operation without lubricants where fluids are prohibited or impractical. The coating withstands at least 200 degrees Celsius higher temperatures, generates less heat and resists higher stress and instant impact better than standard coated cutters.

Pneumatic accessory limits

As a pneumatic accessory the cutters depend on the air supply and chuck rigidity of the host drill press for consistent performance. They are not intended for hand-held drilling or for materials and thicknesses outside the 11/16 by 1 inch cutting envelope.

Highlights

  • Cuts without lubricants thanks to AICrN coating
  • Withstands 200°C higher temps than TiAlN cutters
  • Produces less heat under load than conventional cutters
  • Resists high stress and impact with chromium-aluminum blend
  • 11/16 x 1 inch Weldon shank fits pneumatic tools

Specifications

BrandWALTER

Questions about this item

How often will the AICrN coating on the ICECUT annular core cutter need replacement under normal use?

The chromium-aluminum AICrN coating is designed to withstand higher stress and impact than conventional TiAIN cutters, reducing wear when lubricants cannot be used.

What temperature limit does the ICECUT annular core cutter reach first during sustained cutting?

The exclusive AICrN coating withstands at least 200 degrees Celsius higher temperatures than standard TiAIN cutters, delaying thermal failure under load.

Does the Weldon shank ICECUT cutter generate less heat during all-day pneumatic operation?

Yes, the chromium-aluminum coating produces less heat than conventional TiAIN cutters, lowering thermal buildup during continuous use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.