We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vszerda SFF-8643 to four SATA breakout cable 0.5 m 1.6 ft

Vszerda

Vszerda SFF-8643 to 4x SATA cable 0.5 m 1.6 ft

SKU CH-ZCRF-QMNRH

Connects a Mini SAS SFF-8643 host port to four SATA drives over a 0.5 m cable

Cable Length 3.3 Feet

  • Connect four SATA drives via one SFF-8643 port
  • 5 m length fits compact server chassis
  • SFF-8643 host connector plugs into RAID controllers
  • Supports 12 Gb SAS throughput for fast storage
  • Straightforward internal cabling for HDD and SSD arrays

Connects SFF-8643 host to four SATA drives

This 0.5 metre cable links a motherboard or RAID controller with an SFF-8643 port to up to four SATA hard drives or SSDs. The host end uses the compact SFF-8643 connector while the target end splits into four standard 7-pin SATA plugs. It is built for internal server or workstation storage chains.

Suits builders wiring internal SAS controllers

The cable only works when the SFF-8643 port is on the host side such as a controller or motherboard. It will not function if the SFF-8643 connector sits on a backplane or drive enclosure. Buyers needing a backplane-to-controller link or a longer run should look at a different cable.

Cable length is 0.5 metre

The fixed 1.6 foot length fits tight chassis routing between a controller card and nearby drive bays. No other length is offered with this part number. Measure the internal path before ordering to confirm the reach is sufficient.

Highlights

  • Connect four SATA drives via one SFF-8643 port
  • 5 m length fits compact server chassis
  • SFF-8643 host connector plugs into RAID controllers
  • Supports 12 Gb SAS throughput for fast storage
  • Straightforward internal cabling for HDD and SSD arrays

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What length and connector type do I need to reach from an SFF-8643 port to four SATA drives?

The cable is 0.5 m (1.6 ft) long with an SFF-8643 host connector on one end and four SATA 7-pin plugs on the other.

Which end plugs into the controller and which end plugs into the drives, and what is the common mistake?

The SFF-8643 end goes into the motherboard or RAID controller; the four SATA ends go to the drives. The mistake is using it with a backplane that has an SFF-8643 port — this cable will not work there.

Will this cable support 12 Gb/s SAS speeds when I upgrade my drives later?

Yes, the SFF-8643 interface is designed for a smooth transition from 6 Gb/s to 12 Gb/s SAS, so the same cable can handle the higher speed.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.