We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Internal 12G HD Mini SAS SFF-8643 to four SATA cable, woven mesh sheath, 50cm length

Vszerda

Vszerda SFF86434SATA50CM 12G HD Mini SAS SFF-8643 to 4 SATA cable

SKU CH-22JR-ZKREG

Connects a 12 Gbps SFF-8643 RAID controller to four SATA drives with secure latching connectors and strain-relief tape over 1.64 ft of cable

Cable Length 1.64 Feet

  • Connects 12 Gbps RAID controller to four SATA drives
  • 36-pin SFF-8643 host connector with latch locking
  • Four SATA 7-pin target connectors with stainless steel latches
  • 64ft length with woven mesh sheath for routing
  • P1-P4 markers and acetate tape for strain relief

What this cable connects

This 50 cm internal cable links a 12 Gbps host or RAID controller that uses an SFF-8643 connector to four SATA drives. The forward design carries signals from the controller to the target devices. It is built for direct-attached storage inside a server or workstation chassis.

The connector pair that must match

One end carries a 36 pin SFF-8643 male plug with latch locking for the host side. The other end splits into four 7 pin SATA female connectors, each with a stainless steel latch for a secure drive connection. Both ends must match your controller and backplane exactly.

Suits builders wiring four SATA drives to one

This suits anyone connecting up to four SATA hard drives or SSDs to a single high-density controller port such as the Adaptec 71605 or 7895. It does not suit installations that need a reverse cable, an external bracket, or more than four drive connections from one controller port.

Highlights

  • Connects 12 Gbps RAID controller to four SATA drives
  • 36-pin SFF-8643 host connector with latch locking
  • Four SATA 7-pin target connectors with stainless steel latches
  • 64ft length with woven mesh sheath for routing
  • P1-P4 markers and acetate tape for strain relief

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What does the 12 Gbps rating mean when this cable is installed in a server?

The cable supports a 12 Gbps host link, but each of the four SATA drives is limited to 6 Gbps, so the total bandwidth is shared across the four ports.

How does the SFF-8643 interface limit real-world performance?

The 36-pin SFF-8643 connector carries four lanes at 12 Gbps, yet the SATA 7-pin targets cap each drive at 6 Gbps, making the drive interface the bottleneck.

What clearance is needed to route the 1.64 ft cable with its mesh sheath and split ends?

The 50 cm length with woven mesh on half the run and four labelled SATA tails requires enough depth for the SFF-8643 latch plus individual drive connectors.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.