We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Internal SFF-8643 to four SATA cable with woven mesh sleeve and P1-P4 markers

Vszerda

Vszerda SFF-8643 to 4 SATA cable 100cm

SKU CH-ZSB3-WN9RA

Connects a 12 Gbps SFF-8643 RAID controller to four SATA drives with 100 cm length and secure latching connectors

Cable Length 3.3 Feet

  • Connects 12 Gbps RAID controller to four SATA drives
  • 36-pin SFF-8643 host connector with secure latch lock
  • Four SATA 7-pin target connectors with stainless steel latches
  • 100 cm slim ribbon cable with acetate cloth tape strain relief
  • Woven mesh sheath on half length for easier routing

Host-to-drive connectivity

This Vszerda cable links a RAID controller with an SFF-8643 port to four SATA hard drives or solid-state drives. The 100 cm ribbon assembly carries 6 Gbps per lane and is built for internal chassis routing. Stainless-steel latches on every connector keep each link secure under vibration.

Suits builders adding SATA arrays to a Mini SAS

Installers who need to break out a single 36-pin SFF-8643 host port into four 7-pin SATA targets will find the pin-out and length convenient. The woven mesh sheath on the first half of the run eases dressing behind backplanes. Systems that require native 12 Gbps SAS device links or a different breakout count should look elsewhere.

6 Gbps per SATA lane

Each of the four SATA connectors delivers up to 6 Gbps, matching the SATA III specification. The hybrid HD Mini SAS design also maintains compatibility with 3 Gbps and 6 Gbps hosts while the infrastructure moves toward 12 Gbps..verify this rate against your controller and drive specifications before purchase.

Highlights

  • Connects 12 Gbps RAID controller to four SATA drives
  • 36-pin SFF-8643 host connector with secure latch lock
  • Four SATA 7-pin target connectors with stainless steel latches
  • 100 cm slim ribbon cable with acetate cloth tape strain relief
  • Woven mesh sheath on half length for easier routing

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What is the maximum data rate per SATA lane on this SFF-8643 to 4 SATA cable?

Each of the four SATA lanes supports up to 6 Gbps, while the SFF-8643 host side is rated for 12 Gbps aggregate bandwidth.

Does the woven mesh sheath and acetate cloth tape help with airflow and heat dissipation in a fully populated chassis?

The woven mesh covers half the cable for easier routing and the acetate cloth tape provides strain relief; neither is specified as a thermal management feature.

Which RAID controllers are confirmed compatible with this SFF-8643 to 4 SATA forward cable?

The cable is listed as compatible with Adaptec RAID 71605 and 7895 storage controllers.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.