We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
SAS cable with four SATA 7-pin connectors on each end, 100 cm length

Vszerda

Vszerda SAS Internal 4 SATA Host to 4 SATA 7pin Target 6Gbps Cable 100 cm

SKU CH-Z3PX-PJ4WR

Connects four SATA drives to a four-port SAS controller at 6 Gbps over 100 cm

Cable Length 100 cm

  • Connect four drives with one cable using 4×7-pin SATA connectors
  • Supports 6 Gbps SAS spec for fast server RAID transfers
  • 100 cm length reaches drives across full-tower chassis
  • Straight 7-pin plugs ensure secure lock on host and target ports
  • New cable ships ready for immediate internal storage upgrades

SAS 4 SATA Host Cable

This cable connects four SATA drives to a single SAS 4 SATA host controller using 7-pin connectors on both ends. It is intended for server and RAID deployments that require a direct multi-drive link without a backplane. Builders using consumer motherboards with standard SATA ports will not be able to attach the host connector.

Capacity and headroom

The link operates at up to 6 Gbps per lane, matching the SATA 6 Gbps specification and providing full bandwidth for four mechanical drives or SATA SSDs. Performance will be limited by the slowest drive on the channel, and the cable does not add any RAID processing or port multiplication beyond the four physical connections.

Bundled accessories impact

No additional brackets, mounting hardware, or software utilities are included with the cable. Installation relies entirely on the existing drive bays and controller card in the chassis, so the accessory bundle does not change any system requirements or configuration steps.

Highlights

  • Connect four drives with one cable using 4×7-pin SATA connectors
  • Supports 6 Gbps SAS spec for fast server RAID transfers
  • 100 cm length reaches drives across full-tower chassis
  • Straight 7-pin plugs ensure secure lock on host and target ports
  • New cable ships ready for immediate internal storage upgrades

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 100 cm cable reach drives in a full-tower case when the controller is mounted at the top?

At 100 cm the cable spans most full-tower layouts; route it behind the motherboard tray to avoid tension on the four SATA 7-pin connectors.

How can I confirm the 6 Gbps link is active after connecting four drives?

Check the controller BIOS or OS disk utility — each drive should report a 6 Gbps SAS/SATA link speed with no errors.

Does the package include mounting brackets or only the 4-to-4 SATA cable?

Only the 100 cm SAS internal cable with four SATA 7-pin host and four SATA 7-pin target connectors is supplied.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.