We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Internal SAS 4 SATA host cable splitting to four SATA 7-pin target connectors, 50cm length

Vszerda

Vszerda SAS 4 SATA Host to 4 SATA 7pin Target 50cm cable

SKU CH-ZVS1-8K5T2

Connects four SATA drives to a four-port SAS host controller with 50cm cables

Cable Length 50 cm

  • Connect four SATA drives to a single SAS host port
  • 6 Gbps SAS specification supports high-throughput RAID arrays
  • 50 cm length fits compact server chassis
  • Straight 7-pin SATA connectors on both host and target ends
  • Internal cable design for clean airflow inside the case

Connection layout

This cable links a four-lane SAS host connector to four individual SATA 7-pin drive connectors. It is built for servers and workstations that use a single SAS port to feed multiple SATA hard disks or SSDs in a RAID or JBOD array.

6 Gb/s SAS rating

The assembly meets the 6 Gb/s SAS specification, so each of the four lanes can transfer data at that rate. If your controller or backplane only supports 3 Gb/s the cable will still work, but the higher ceiling is the figure that matches modern SAS HBAs and RAID cards.

Straightforward internal routing

At 50 cm the cable reaches typical drive cages without excess slack that blocks airflow. The 7-pin connectors are keyed, so they only seat one way; forcing them can bend pins. Buyers who need an external eSATA or mini-SAS HD breakout should choose a different cable.

Highlights

  • Connect four SATA drives to a single SAS host port
  • 6 Gbps SAS specification supports high-throughput RAID arrays
  • 50 cm length fits compact server chassis
  • Straight 7-pin SATA connectors on both host and target ends
  • Internal cable design for clean airflow inside the case

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What does the 6 Gbps rating mean once the cable is installed in a server?

It indicates the cable meets the 6 Gb/s SAS specification, so each of the four lanes can carry up to 6 Gbps between the controller and the connected drives.

Which interface standard does the cable use and what speed does that cap in practice?

The cable follows the SAS 6 Gbps standard, limiting each SATA lane to a maximum of 6 Gbps regardless of the drive’s own rating.

What physical space and connectors are required to fit this 50 cm cable?

You need room for a 50 cm run and four SATA 7-pin ports on the host side plus four SATA 7-pin ports on the drive side.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.