Vszerda
Vszerda RJ50 10P10C 90° Down Angle Ethernet Cable 30cm
A shielded 30 cm RJ50 10P10C right-angle male-to-male cable with down-angled connectors for tight-space data and radio links
- TypeRJ50
- Connector ARj50
- ColorBlack
- Features, , , ,
- 90° down-angle design fits tight spaces and reduces cable strain
- 10-pin RJ50 connector follows RJ specification and works with RJ45 sockets
- Aluminium-foil shielding on all 10 cores blocks external signal interference
- 30 cm length with 26 AWG conductors keeps runs short and tidy
- Compatible with Motorola MTM5400, MTM800, CDM1250 and Medusa/Octoplus repair boxes
RJ50 10P10C 90° Down Angle Cable
This 30 cm RJ50 cable carries ten conductors in a shielded 26 AWG assembly. It suits technicians linking Motorola MTM5400, MTM800, CDM1250 or compatible radios, plus code scanners, Digiboard gear and Medusa or Octoplus repair boxes. The down-angle plugs fit tight panels where straight connectors would foul adjacent ports.
Easy Install, Watch Pin Alignment
Both ends are pre-crimped right-angle males, so no termination tools are needed — just push each plug until the latch clicks. The 90° bend reduces strain but demands correct orientation; forcing a plug upside-down can bend the ten pins inside the RJ50 housing. Verify the keyway matches the socket before applying pressure.
Check Port Clearance and Pin Count
Confirm your device uses a true RJ50 10P10C socket, not an 8-pin RJ45 jack — the plugs share outer dimensions but the extra two contacts will not mate in an RJ45 port. Measure 30 cm between the two connection points; the fixed length offers no slack for longer runs. Ensure the down-angle direction points toward free space, not into a chassis wall or another cable.
Highlights
- 90° down-angle design fits tight spaces and reduces cable strain
- 10-pin RJ50 connector follows RJ specification and works with RJ45 sockets
- Aluminium-foil shielding on all 10 cores blocks external signal interference
- 30 cm length with 26 AWG conductors keeps runs short and tidy
- Compatible with Motorola MTM5400, MTM800, CDM1250 and Medusa/Octoplus repair boxes
Specifications
| Brand | QIANRENON |
|---|---|
| Type | RJ50 |
| Connector A | Rj50 |
| Color | Black |
| Features | , , , , |
Questions about this item
How can I confirm the cable is working after connecting it to my Motorola MTM5400 radio?
Check that the radio establishes a data link and transmits without errors; the 10-pin connector and foil shielding should give a stable connection.
What comes in the package and do I need any extra adapters for a Digiboard?
The box contains one 30 cm down-angle RJ50 10P10C cable; no extra adapters are required for Digiboard connections.
Which version should I choose for a Vanatoo speaker system versus a Medusa Box repair setup?
Both use the same RJ50 10P10C interface, so the single 30 cm down-angle cable listed works for either device.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SATACables MSD-887 micro SATA extension cable 20 inch 46mm SATA 2.6
- 1.66 ft.
eForChina 19V 4.74A 90W UK Plug AC Adapter 5.5x2.5mm Black
- Black
- Power Adapter



