We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat micro SATA male to female extension cable 20 inch 46mm SATA 2.6

SATACables

SATACables MSD-887 micro SATA extension cable 20 inch 46mm SATA 2.6

SKU CH-C2HS-3QPGM

Extends 1.8 inch Micro-SATA drives 20 inches with SATA 2.6 compliance

  • Cable Length1.66 ft.
  • Extends 1.8 inch micro-SATA drives
  • Complies with SATA 2.6 specification
  • 20 inch length for flexible routing
  • Male-to-female 7+7+2 data and power extension

Micro SATA 2.6 extension for 46 mm drives

This 20 inch cable carries both data and power through a male-to-female Micro SATA connector. It is built to the SATA 2.6 revision for 46 mm form-factor SSDs and 1.8 inch hard drives. The MSD-887 model adds 1.66 ft of reach inside tight enclosures.

Sustained signal integrity over full length

The extension maintains the SATA 2.6 link without retraining or speed drops during continuous read and write cycles. Shielded conductors keep crosstalk low so the drive holds its negotiated transfer rate across the entire cable run. It is not suited for standard 2.5 inch or 3.5 inch SATA devices.

Highlights

  • Extends 1.8 inch micro-SATA drives
  • Complies with SATA 2.6 specification
  • 20 inch length for flexible routing
  • Male-to-female 7+7+2 data and power extension

Specifications

ModelMSD-887
Cable Length1.66 ft.

Questions about this item

How much heat or power does the MSD-887 micro SATA extension add when running all day?

The MSD-887 is a passive micro SATA extension cable with no active components, so it adds no measurable heat or power draw during continuous operation.

What drive connector must my 1.8 inch SSD or HDD have for the MSD-887 to work?

Your 1.8 inch drive must use a 46mm micro SATA 7+7+2 connector that follows the SATA 2.6 specification for the MSD-887 extension to mate correctly.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.