We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four black metal spindle rods with plastic adjustment wheels and rubber feet, 12.4 cm long

vmaisi M8-Black Fence Post Cap 4 Pack 12.4 cm Black

SKU CH-Y023-7QWQM MPN M8-Black

Four 12.4 cm threaded spindle rods with rubber feet replace lost hardware on pressure-mounted safety gates

  • Dimensions12.4 cm x 3.8 cm x 3.8 cm
  • Weight0.281 kilograms
  • FinishBlack
  • 4-pack supplies spare rods for pressure-mounted gates
  • 8 mm M8 threads fit compatible gate hardware
  • 4 cm extra-long spindles suit wider openings
  • Adjustable wheels with rubber feet protect walls
  • Black metal finish resists corrosion for lasting use

Replacement Spindle Rods for Pressure Gates

This four-pack supplies 8 mm threaded spindle rods designed as direct replacements for pressure-mounted pet and baby safety gates. Each rod measures 12.4 cm in total length, providing extra reach for wider doorways or openings where the original hardware fell short.

Sustained Pressure Performance

Under continuous compression the metal rods maintain even force across the four contact points, keeping the gate stable without loosening over daily use. The plastic adjustment wheels and rubber feet distribute load to protect wall surfaces while the threaded shafts resist bending under repeated tension cycles.

Straightforward Installation

Fit requires only rotating each wheel to close the gap, inserting the rods into the gate's corner holes, then expanding until the rubber feet contact the frame. The sole prerequisite is confirming the gate's spindle holes accept an 8 mm diameter bolt; otherwise the rods cannot be seated.

Highlights

  • 4-pack supplies spare rods for pressure-mounted gates
  • 8 mm M8 threads fit compatible gate hardware
  • 4 cm extra-long spindles suit wider openings
  • Adjustable wheels with rubber feet protect walls
  • Black metal finish resists corrosion for lasting use

Specifications

Brandvmaisi
ModelM8-Black
Dimensions12.4 cm x 3.8 cm x 3.8 cm
Weight0.281 kilograms
FinishBlack

Questions about this item

How much force do the 8 mm M8 spindle rods exert on the wall when the gate is tensioned all day?

The rods rely on manual adjustment wheels to expand the 4.8 inch length against the opening; no spring rate or sustained clamping force figure is published.

What gate hardware must already be present for these 12.4 cm rods to install?

The gate frame needs four corner holes that accept 8 mm diameter M8 bolts, plus a flat mounting surface for the rubber feet to grip.

Will the 8 mm threads on these rods match the spindle holes on my older pressure-mounted gate?

Compatibility requires the existing gate to use M8 × 8 mm holes; measure the current bolts before ordering.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.