We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red metal reciprocating air saw with safety lever throttle and two blades included

Viking Air Tools

Viking Air Tools VT7500 Reciprocating Air Saw and File, 5000 spm

SKU CH-7NBF-WVFA3

Reciprocating air saw and file delivers 5000 strokes per minute with a 3/8 inch stroke length and safety lever throttle

  • 5,000 strokes per minute for fast cutting
  • Variable speed throttle gives precise control
  • Light 2.8 lb design reduces operator fatigue
  • Includes two blades and five files for versatility
  • Runs on 90 psi shop air with 4 cfm consumption

What this tool is and who uses it

The Viking VT7500 is an air-powered reciprocating saw and file built for general-duty cutting and shaping tasks in automotive and workshop environments. It runs on compressed air at 90 psi and delivers up to 5000 strokes per minute with a 3/8 inch stroke length. Variable speed control via a safety lever throttle lets the operator match speed to material. Two blades and five files are included for immediate use.

The specification that decides fit

Air consumption is 4 cfm, so the compressor must supply that flow continuously at 90 psi through a 1/4 inch NPT inlet with a minimum 3/8 inch hose. If the available air supply cannot meet this demand, the tool will lose power or stall during sustained cuts. The 2.8 lb weight keeps fatigue low for overhead or extended work, but the fixed straight stroke and non-adjustable shoe limit precision on curved or flush cuts.

How it fits into a shop setup

Connect the tool to a suitable air line using the 1/4 inch NPT fitting and ensure the hose meets the 3/8 inch minimum diameter to avoid pressure drop. The safety lever throttle prevents accidental starts when the tool is set down. Included blades and files cover common metal and plastic cutting needs, freeing the operator from sourcing consumables before the first job. No electrical power is required, so the saw can be used wherever compressed air is available.

Highlights

  • 5,000 strokes per minute for fast cutting
  • Variable speed throttle gives precise control
  • Light 2.8 lb design reduces operator fatigue
  • Includes two blades and five files for versatility
  • Runs on 90 psi shop air with 4 cfm consumption

Specifications

BrandVIKING AIR TOOLS

Questions about this item

What does 5000 spm mean when I am cutting metal with this saw?

The tool delivers up to 5000 strokes per minute, so the blade moves back and forth 5000 times each minute for fast material removal in sheet metal and body panels.

How does the 1/4 in NPT air inlet and 90 psi requirement limit the air supply I need?

You must supply 90 psi through a 1/4 in NPT fitting with at least 4 cfm flow; the 3/8 in minimum hose size prevents pressure drop at that rate.

What space and mounting clearance does the 2.8 lb body need?

At 2.8 lb the saw is light enough for one-hand control; the straight body with safety-lever throttle fits in tight panel gaps without a fixed shoe or bracket.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.