We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass cutting tip for propylene torches, two-piece design

Victor Thermal Dynamics

Victor Thermal Dynamics Cutting Tip 3-GPP Propylene 0333-0265

SKU CH-HN1V-T4V5B

A two-piece propylene cutting tip for handheld or machine torches, compatible with Victor HC 1200C, MT 1065, MT 5 and ST series torches and CA 2460, CA 2461, CA 2462 and CA 411-1 attachments.

  • TypeWelding Parts & Supplies
  • Cuts 2 in to 2 1/2 in thick material with Propylene fuel
  • Two-piece tip design fits HC 1200C and MT 1065 torches
  • Works with ST 300FC, ST 400C, ST 900FC, ST 1000FC, ST 2600FC torches
  • Compatible with CA 2460, CA 2461, CA 2462 and CA 411-1 attachments
  • Built for fabrication, repair and maintenance applications

Victor Cutting Tip 3-GPP Propylene

The Victor 0333-0265 cutting tip is designed for oxy-fuel cutting with propylene fuel gas. It fits handheld and machine torches using the 1-GPP tip series and serves fabrication, repair and maintenance work. The tip handles material thicknesses from 2 in to 2 1/2 in. Buyers who need a different fuel gas or a tip size outside this range cannot use this product.

Installation and common issues

The two-piece design threads onto compatible torches such as the HC 1200C, MT 1065, MT 5, ST 1000FC, ST 2600FC, ST 300FC, ST 400C and ST 900FC. It also matches cutting attachments CA 2460, CA 2460+, CA 2461, CA 2461+, CA 2462, CA 2462+ and CA 411-1. Misalignment during assembly or using an incompatible torch series are the usual causes of poor cut quality.

Propylene cutting limits

Propylene requires a different preheat flame chemistry than acetylene, so the tip is only rated for the 2 in to 2 1/2 in thickness window with this fuel. The 1-GPP series geometry fixes the orifice size, preventing adjustment for thicker plate. Operators needing to cut thinner or thicker material must select a different tip size or fuel combination.

Highlights

  • Cuts 2 in to 2 1/2 in thick material with Propylene fuel
  • Two-piece tip design fits HC 1200C and MT 1065 torches
  • Works with ST 300FC, ST 400C, ST 900FC, ST 1000FC, ST 2600FC torches
  • Compatible with CA 2460, CA 2461, CA 2462 and CA 411-1 attachments
  • Built for fabrication, repair and maintenance applications

Specifications

BrandVICTOR
TypeWelding Parts & Supplies

Questions about this item

How can I confirm the 3-GPP tip is cutting cleanly at 2 to 2 1/2 inch thickness after installation?

Light the torch, set the propylene pressure to the torch manual value, and make a test cut on scrap plate within the 2 in to 2 1/2 in range; a smooth kerf with minimal dross shows the tip is working as intended.

What comes in the package and is any extra hardware required for the HC 1200C or MT 1065 torches?

The box contains the Victor 0333-0265 two-piece 3-GPP cutting tip only; no additional parts are included, and the tip threads directly onto compatible torches such as HC 1200C, MT 1065, MT 5, ST 1000FC, ST 2600FC, ST 300FC, ST 400C, ST 900FC or cutting attachments CA 2460, CA 2461, CA 2462, CA 411-1.

Which tip size should I choose for hand-held or machine cutting of 2 in to 2 1/2 in steel with propylene fuel?

Select the size 3 tip in the 1-GPP series — it is rated for 2 in minimum and 2 1/2 in maximum cutting thickness on propylene with hand-held or machine torches.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.