We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Victor ST931FC 36-inch 75-degree heavy-duty straight cutting torch, metal finish

Victor

Victor ST931FC 36" 75° HD Straight Cutting Torch

SKU CH-YQDW-A6WHP

A 36-inch straight cutting torch with a 75-degree head angle for acetylene, natural gas, propane or propylene, accepting multiple Victor tip series and rated for up to five inches of cutting thickness

  • Cuts up to 5 in thick steel with compatible tips
  • Works with acetylene, natural gas, propane and propylene fuels
  • 75-degree head angle gives comfortable grip for straight cuts
  • 36 in overall length provides extended reach on large workpieces
  • Weighs 5.1 lb for controlled handling during long jobs

Victor ST931FC 36" Handheld Cutting Torch

The Victor ST931FC is a 36 inch handheld cutting torch with a 75 degree head angle designed for heavy duty metal cutting. It accepts acetylene, natural gas, propane and propylene fuels and cuts up to 5 inches thick. Compatible with the ST 900FC series and tip series including 1-101, 1-108, 1-112 and 1-200 among others. Professional fabricators and maintenance crews use it for straight cuts in structural steel and plate work.

Thermals Noise and Power Draw

The torch body weighs 5.1 lb and channels high temperature flame through the 75 degree head during prolonged cuts. Heat concentrates at the tip and head so operators wear rated gloves and shields. No electrical power is drawn and the only sound is the roar of the combustion gases at the cutting zone. Fuel pressure and tip selection govern flame intensity and cutting speed.

Build Quality Connectors and Mounting

The torch uses a 9/16 inch -18 inlet connection with B size hose fittings for secure fuel and oxygen supply. Brass and steel construction resists corrosion and withstands rough handling on job sites. The 36 inch length keeps the operator back from the cut line while the 75 degree head improves visibility of the kerf. Tip changes use the standard 1 series threads so swaps are fast between 1-101, 1-303MP or 1-GPN tips.

Highlights

  • Cuts up to 5 in thick steel with compatible tips
  • Works with acetylene, natural gas, propane and propylene fuels
  • 75-degree head angle gives comfortable grip for straight cuts
  • 36 in overall length provides extended reach on large workpieces
  • Weighs 5.1 lb for controlled handling during long jobs

Specifications

BrandVICTOR

Questions about this item

How do I connect the torch to my gas supply using the 9/16 In.-18 inlet?

Thread the regulator hose fitting onto the 9/16 In.-18 inlet connection, tighten with a wrench, then leak-test all joints with soapy water before lighting; the step often missed is the leak test.

Which cutting tips wear out and need replacement on the ST931FC?

Compatible tips include the 1-101, 1-108, 1-112, 1-118, 1-200, 1-207, 1-218, 1-244, 1-303MP, 1-318MP, 1-BTMP, 1-BTN, 1-CSN, 1-GPN, 1-GPP, 1-GTB, 1-HPN, 1-HPP and 1-MCN series; replace tips when orifices erode or cut quality drops.

At what metal thickness does the torch reach its 5 in maximum cut limit?

The torch is rated for a maximum cutting thickness of 5 in; sustained cuts at or near that thickness will hit the limit first and require slower travel speed to maintain cut quality.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.