We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small brass welding tip with single-piece construction and smooth finish

Victor

Victor Cutting Tip 3-101-3 Size 3 One Piece

SKU CH-KYEG-0S34N

One-piece acetylene cutting tip for handheld or machine torches, cuts up to 2½ inches thick at 15 in/min with 14–26 scfh fuel flow

  • Size/Dimensions3-101-3
  • MaterialHAWA
  • TypeOne Piece,Cuts up to 2"
  • One-piece design simplifies setup and reduces leak points
  • Cuts material up to 2 inches thick for fabrication tasks
  • Light-to-medium preheat flame suits repair and maintenance work
  • Acetylene flow rate 14 to 26 scfh matches torch requirements
  • Compatible with Victor CA 1260, CA 1350, CA 1351, CA 1352, CA 24709, CA 411-3 attachments

Victor Cutting Tip 3-101-3 Size 3

This Victor cutting tip is a one-piece acetylene tip designed for handheld and machine torches. It suits fabrication, repair and maintenance tasks requiring cuts up to two inches thick. The tip fits the 3-101 series and works with compatible cutting attachments. Buyers needing propane or propylene fuel tips cannot use this model.

Sustained cutting performance

The tip delivers a light to medium preheat flame with an acetylene flow rate of 14 to 26 scfh. Maximum cutting speed reaches 15 inches per minute while maintaining a kerf width of 0.11 inches. It handles material thicknesses from two to two and a half inches consistently. Operators requiring faster travel speeds or different preheat characteristics should select another tip size.

Thermals noise and power draw

As a passive metal consumable the tip generates no noise and draws no electrical power. Heat is confined to the flame zone and the torch head during normal cutting operations. Proper tip seating and clean orifices maintain efficient gas flow and flame stability. Users must supply a compatible Victor torch and acetylene supply rated for the stated flow range.

Highlights

  • One-piece design simplifies setup and reduces leak points
  • Cuts material up to 2 inches thick for fabrication tasks
  • Light-to-medium preheat flame suits repair and maintenance work
  • Acetylene flow rate 14 to 26 scfh matches torch requirements
  • Compatible with Victor CA 1260, CA 1350, CA 1351, CA 1352, CA 24709, CA 411-3 attachments

Specifications

BrandVictor
Size/Dimensions3-101-3
MaterialHAWA
TypeOne Piece,Cuts up to 2"

Questions about this item

How much heat does the tip generate during a full-day cutting job?

The tip runs on acetylene at 14 to 26 scfh with a light-to-medium preheat flame, producing enough heat to cut up to 2 1/2 in thick steel at speeds up to 15 in/min.

Which cutting attachments are required to mount this tip?

It fits Victor CA 1260, CA 1350, CA 1351, CA 1352, CA 24709 and CA 411-3 cutting attachments.

Will this tip work with the older Victor torch handle I already own?

Yes, provided your handle accepts the 3-101 series one-piece tips and you use a compatible cutting attachment such as the CA 1260 or CA 1350.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.