We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small brass acetylene cutting tip, one-piece design, size 00

Victor

Victor Acetylene Cutting Tip 3-101-00

SKU CH-1R85-F59MY

Acetylene cutting tip for handheld or machine torches, one-piece design, cuts up to 1/4 in at 27 to 30 in/min with 0.05 in kerf

  • Size/Dimensions3-101-00
  • MaterialHAWA
  • TypeOne Piece
  • Cuts up to 1/4 inch thick material with 0.05 inch kerf
  • One-piece design simplifies setup and resists tip separation
  • Works with CA 1260, 1350, 1351, 1352, 24709, 411-3 attachments
  • Light to medium preheat flame suits fabrication and repair tasks
  • Acetylene flow rate 4 to 6 scfh delivers 27 to 30 inches per minute cutting speed

Victor Acetylene Cutting Tip 3-101-00

The Victor 3-101-00 is a one-piece acetylene cutting tip built for handheld and machine torches. It serves fabricators and maintenance crews who need a light-to-medium preheat flame for cuts up to a quarter inch thick. The tip fits Victor CA 1260, CA 1350, CA 1351, CA 1352, CA 24709 and CA 411-3 cutting attachments.

Thermals noise and power draw

The tip runs on an acetylene flow of 4 to 6 scfh and produces a kerf of 0.05 in. Cutting speeds range from 27 to 30 in/min depending on material and operator technique. Heat output scales with the chosen flow rate and travel speed.

Upgrade path

This tip replaces a worn or damaged 3-101 series tip of the same size on compatible Victor attachments. The jump is worth it when the old tip shows pitting, an uneven flame or a kerf wider than 0.05 in. It is not for operators who need a larger tip size or a different fuel gas.

Highlights

  • Cuts up to 1/4 inch thick material with 0.05 inch kerf
  • One-piece design simplifies setup and resists tip separation
  • Works with CA 1260, 1350, 1351, 1352, 24709, 411-3 attachments
  • Light to medium preheat flame suits fabrication and repair tasks
  • Acetylene flow rate 4 to 6 scfh delivers 27 to 30 inches per minute cutting speed

Specifications

BrandVictor
Size/Dimensions3-101-00
MaterialHAWA
TypeOne Piece

Questions about this item

How do I fit the 3-101-00 tip onto my Victor torch and what step is often missed?

Screw the one-piece tip into a compatible cutting attachment such as the CA 1260, CA 1350, CA 1351, CA 1352, CA 24709 or CA 411-3; the step users miss is verifying the attachment model before tightening.

What part will need replacement after extended cutting with this tip?

The tip itself is a consumable; replace it when the orifice wears enough to widen the 0.05 in kerf or when preheat flames become uneven.

What is the first limit reached during a long continuous cut with this tip?

The maximum cutting speed caps at 30 in/min, so sustained runs cannot exceed that rate without losing cut quality.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.